IDEC FT1A-C14KA-B Touch Membrane Replacement
- Model
- FT1A-C14KA-B
Item specifics
- Warranty
- 365 Days
- Shipping
- 2-4 workdays
- Brand
- IDEC
- Supply Parts
- HMI Touch Panel Screen
- Display Size
- 3.8 inches
Review
Description
IDEC FT1A 3.8IN PLC+HMI FT1A-C14KA-B Touch Screen Display Replacement
Operating environment for FT1A-C14KA-B Touchscreen
1. Where dust, briny air, or iron particles exist.
2. Where oil or chemical splashes for a long time.
3. Where oil mist is filled.
4. Where direct sunlight falls on the IDEC FT1A-C14KA-B Touch Screen Tablet.
5. Where strong ultraviolet rays fall on the FT1A.
6. Where corrosive or combustible gasses exist.
7. Where the IDEC FT1A-C14KA-B HMI Panel Glass is subjected to shocks or vibrations
8. Where condensation occurs due to rapid temperature change.
9. Where high-voltage or arc-generating equipment (electromagnetic contactors or circuit protectors) exists in the vicinity.
Ambient Temperature of IDEC FT1A-C14KA-B Touch Membrane
The FT1A is designed to install on a vertical plane so that natural air-cooling is provided. Keep as much space as possible around the FT1A. Allow 100mm minimum clearance above and below the FT1A. Do not install the FT1A where the ambient temperature exceeds the rated operating ambient temperature range. When mounting the FT1A-C14KA-B Touch Digitizer Glass in such locations, provide a forced air-cooling fan or air-conditioner to keep the ambient temperature within the rated temperature range.
Specifications:
The table below describes the parameters of the IDEC FT1A 3.8IN PLC+HMI FT1A-C14KA-B Touch Digitizer Glass HMI.
| Storage Temperature: | -20 ~ 70°C |
| Product Line: | FT1A 3.8IN PLC+HMI |
| Storage Humidity: | 10 to 90% RH |
| Corrosion Immunity: | Free from corrosive gases |
| Brand: | IDEC |
| Operating Temperature: | -20 ~ 60°C |
| Degree of Protection: | IP20 |
| Display Size: | 3.8" |
| Model Number: | FT1A-C14KA-B |
| Warranty: | 1-Year Warranty |
Related IDEC FT1A 3.8IN PLC+HMI No. :
| FT1A 3.8IN PLC+HMI | Description | Inventory status |
| FT1A-C12RA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Panel Replacement | In Stock |
| FT1A-C12RA-S | IDEC FT1A 3.8IN PLC+HMI Touch Digitizer Glass Repair | Available Now |
| FT1A-C14KA-S | IDEC FT1A 3.8IN PLC+HMI Touch Screen Glass Repair | Available Now |
| FT1A-C14SA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Display Replacement | In Stock |
| FT1A-C14SA-S | IDEC FT1A 3.8IN PLC+HMI MMI Panel Screen Repair | Available Now |
| FT1A-M12RA-B | IDEC FT1A 3.8IN PLC+HMI Touchscreen Monitor Replacement | In Stock |
| FT1A-M12RA-S | IDEC FT1A 3.8IN PLC+HMI Touch Screen Tablet Repair | Available Now |
| FT1A-M14KA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Film Replacement | In Stock |
| FT1A-M14KA-S | IDEC FT1A 3.8IN PLC+HMI HMI Touch Membrane Repair | Available Now |
| FT1A-M14SA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Glass Replacement | In Stock |
| FT1A-M14SA-S | IDEC FT1A 3.8IN PLC+HMI Touch Screen Panel Repair | Available Now |
| FT1A 3.8IN PLC+HMI | Description | Inventory status |
IDEC FT1A 3.8IN PLC+HMI Manuals PDF Download:
FAQ:
Question: How to maintain FT1A-C14KA-B Touch Membrane?
Answer: To wipe off smears on the lens and screen surfaces, use a soft cloth dampened with the following solvents. Use neutral detergent(squeeze the cloth tightly) or alcoholic solvents. Do not use solvents such as thinner, ammonia, strong acid and strong alkaline.
Question: What are the accessories of IDEC FT1A-C14KA-B Machine?
Answer:
Common misspellings:
T1A-C14KA-B
FT1A-C14KAB
FT1A-C14KA-BB
FT1A-C14K-AB
FT1A-C14KAB-
