IDEC HG2G-SS21VF-B Touch Monitor Front Overlay Repair
IDEC HG2G-SS21VF-B Touch Monitor Front Overlay Repair
IDEC HG2G-SS21VF-B Touch Monitor Front Overlay Repair
IDEC HG2G-SS21VF-B Touch Monitor Front Overlay Repair
IDEC HG2G-SS21VF-B Touch Monitor Front Overlay Repair
IDEC HG2G-SS21VF-B Touch Monitor Front Overlay Repair
Model
HG2G-SS21VF-B

Item specifics

Warranty
365 Days
Shipping
2-4 workdays
Brand
IDEC
Supply Parts
Touch Screen Tablet Protective Film
Display Size
5.7 inches

Review

Description

IDEC HG2G 5.7in Enhanced HG2G-SS21VF-B HMI Panel Screen Overlay Film Replacement

Order each part separately is available

IDEC HG2G 5.7in Enhanced HMI Parts HG2G-SS21VF-B Touch Screen Front Overlay for repair replacement

Instruction for protective sheet

The Protective Sheet of HG2G-SS21VF-B Touch Screen Glass Front Overlay is replaceable, transparent sheet to protect a display of IDEC HG series. With the protective sheet covered on the display, you can operate touch switches.


Adjusting the HG2G-SS21VF-B Protective Film Touch Panel

A gap may be caused in the operation accuracy of the touch panel by the secular distortion, etc. Readjust the touch panel when there is a gap in the operation of the touch panel.
1. Wipe any dirt off the display using a soft cloth slightly dampened with neutral detergent or alcoholic solvent.
2. Remove the back sheet of the protective sheet.
3. The tab of the protective sheet should be positioned at lower left. Align the right side of the protective sheet with that of the HG2G-SS21VF-B Touch Digitizer Glass Overlay Film, then apply the protective sheet onto the display. Care should be taken to avoid ingress of air.
4. On the top of protective sheet, a thin cover sheet is applied to prevent the protective sheet from being damaged during transportation. Remove it before using IDEC HG2G-SS21VF-B Protective Film HMI Touch Glass.


When a protective sheet gets dirty or damaged, replace the protective sheet with a new one. When replacing the sheet, remove the used adhesives completely. The Protective Sheet has no protection effect against chemicals. HG2G-SS21VF-B Touch Membrane Front Overlay has used a special material to filter out UV rays, however no warranty is given as to be installed in direct sunlight of outside.





Specifications:

The table below describes the parameters of the IDEC HG2G 5.7in Enhanced HG2G-SS21VF-B Front Overlay Touch Screen Tablet HMI.

Storage Temperature: -20 ~ 70°C
Model Number: HG2G-5FT22TF-S
Product Line: HG2G 5.7in Enhanced
Screen Type: Analog Resistive Film
Operating Temperature: -20 ~ 60°C
Display Size: 5.7"
Operating Humidity: 10 to 90% RH
Warranty: 1-Year Warranty
Display Type: 256 Color LCD
Brand: IDEC


Related IDEC HMI No. :

IDEC HMI Description Inventory status
HG2G-5TN22TF-W IDEC HG2G 5.7in Enhanced Touch Screen Glass Front Overlay Replacement In Stock
HG2G-5TN22TF-W IDEC HG2G 5.7in Enhanced HMI Panel Screen Protective Film Repair Available Now
HG2G-5TT22TF-B IDEC HG2G 5.7in Enhanced Touch Digitizer Overlay Film Replacement In Stock
HG2G-5TT22TF-S IDEC HG2G 5.7in Enhanced Touch Screen Glass Protective Film Repair Available Now
HG2G-5TT22TF-W IDEC HG2G 5.7in Enhanced Touch Screen Display Front Overlay Replacement In Stock
HG2G-SB21TF-B IDEC HG2G 5.7in Enhanced Protective Film HMI Panel Screen Repair Available Now
HG2G-SB21TF-S IDEC HG2G 5.7in Enhanced Touchscreen Monitor Front Overlay Replacement In Stock
HG2G-SB21TF-W IDEC HG2G 5.7in Enhanced Touch Screen Film Protective Film Repair Available Now
HG2G-SB21VF-B IDEC HG2G 5.7in Enhanced Front Overlay Touch Monitor Replacement In Stock
HG2G-SB21VF-S IDEC HG2G 5.7in Enhanced Protective Film Touch Membrane Repair Available Now
HG2G-SB21VF-W IDEC HG2G 5.7in Enhanced Touch Screen Tablet Front Overlay Replacement In Stock
HG2G-SB22TF-B IDEC HG2G 5.7in Enhanced Front Overlay Touch Screen Panel Repair Available Now
HG2G-SB22TF-S IDEC HG2G 5.7in Enhanced Touch Screen Tablet Protective Film Replacement In Stock
IDEC HMI Description Inventory status

IDEC HG2G 5.7in Enhanced Manuals PDF Download:

  • HG2G-Brochure
  • IDEC-HG2G-Instruction-Sheet
  • IDEC-HG2G-Mounting-Adapters-Instruction-Sheet

  • FAQ:

    Question: How do I calibrate the touch screen on the HG2G-SS21VF-B HMI?

    Answer: To calibrate the touch panel of HG2G-SS21VF-B, go to the calibration settings in the HMI menu. Follow the on-screen instructions to touch specific calibration points accurately. This process ensures accurate touch input across the screen.


    Question: What are the screen types of HG2G-SS21VF-B Terminal?

    Answer: The screen types of HG2G-SS21VF-B Machine are base screen, popup screen and system screen.


    Question: How can I create and modify screens on the HG2G-SS21VF-B HMI?

    Answer: HG2G-SS21VF-B HMI usually comes with dedicated software for screen development. Install the software on your computer, and then use it to design and customize screens with elements like buttons, images, text, and data display. The software often offers intuitive drag-and-drop interfaces for easy screen creation and modification.

    Common misspellings: 

    HG2-SS21VF-B

    HG2G-SS21V-B

    HG2G--SS21VF-B

    HG2G-SS21VF-BB

    HG2G-SS21VFB-