IDEC HG2G-SB22TF-S Overlay Film Touch Digitizer Repair

Order each part separately is available

Operating environment for HG2G-SB22TF-S Touchscreen Protective Film

1. Where dust, briny air, or iron particles exist.
2. Where oil or chemical splashes for a long time.
3. Where oil mist is filled.
4. Where direct sunlight falls on the IDEC HG2G-SB22TF-S Touch Screen Tablet Front Overlay.
5. Where strong ultraviolet rays fall on the HG2G.
6. Where corrosive or combustible gasses exist.
7. Where the IDEC HG2G 5.7in Enhanced HG2G-SB22TF-S Front Overlay HMI Panel Glass is subjected to shocks or vibrations
8. Where condensation occurs due to rapid temperature change.
9. Where high-voltage or arc-generating equipment (electromagnetic contactors or circuit protectors) exists in the vicinity.

Ambient Temperature of IDEC HG2G-SB22TF-S Touch Membrane Film Overlay

The HG2G is designed to install on a vertical plane so that natural air-cooling is provided. Keep as much space as possible around the HG2G. Allow 100mm minimum clearance above and below the HG2G. Do not install the HG2G where the ambient temperature exceeds the rated operating ambient temperature range. When mounting the HG2G-SB22TF-S Protective Film Touch Digitizer Glass in such locations, provide a forced air-cooling fan or air-conditioner to keep the ambient temperature within the rated temperature range.