IDEC HG2G-5FT22TF-S Front Overlay Touch Membrane Repair
IDEC HG2G-5FT22TF-S Front Overlay Touch Membrane Repair
IDEC HG2G-5FT22TF-S Front Overlay Touch Membrane Repair
IDEC HG2G-5FT22TF-S Front Overlay Touch Membrane Repair
IDEC HG2G-5FT22TF-S Front Overlay Touch Membrane Repair
IDEC HG2G-5FT22TF-S Front Overlay Touch Membrane Repair
Model
HG2G-5FT22TF-S

Item specifics

Warranty
365 Days
Shipping
2-4 workdays
Brand
IDEC
Supply Parts
Protective Film Touch Screen Glass
Display Size
5.7 inches

Review

Description

IDEC HG2G 5.7in Enhanced HG2G-5FT22TF-S HMI Touch Glass Protective Film Replacement

Order each part separately is available

IDEC HG2G 5.7in Enhanced HMI Parts HG2G-5FT22TF-S Touch Panel Front Overlay for repair replacement

Maintenance and Inspection of HG2G-5FT22TF-S Protective Film Touch Screen Display

Maintain and inspect the IDEC HG2G-5FT22TF-S Touch Digitizer Glass Overlay Film periodically to ensure the best performance. Do not disassemble, repair, or modify the HG2G 5.7in Enhanced HG2G-5FT22TF-S Protective Film MMI Touch Glass during inspection. Wipe any stain off the display using a soft cloth slightly dampened with neutral detergent or alcoholic solvent. Do not use solvents such as thinner, ammonia, strong acid, and strong alkaline. Check the terminals and connectors to make sure of no loose screws, incomplete insertion or disconnected lines. Make sure that all mounting clips and screws are tightened sufficiently.If the mounting clips are loose, tighten the screw to the recommended tightening torque.


Adjusting the HG2G-5FT22TF-S Touch Panel Front Overlay

A gap may be caused in the operation accuracy of the touch panel by the secular distortion, etc. Readjust the touch panel when there is a gap in the operation of the touch panel.


Panel Cut-out Dimensions of HG2G-5FT22TF-S Touchscreen Front Overlay

Place the IDEC HG2G in a panel cut-out and fasten with the attached mounting clips. Do not tighten excessively, otherwise the HG2G HG2G-5FT22TF-S Overlay Film Touch Membrane may warp and cause wrinkle on the display, or impair the waterproof characteristics.


Note for operation

The screen becomes blank when the backlight is burnt out; however, the HG2G-5FT22TF-S Touch Panel Protective Film remains enabled. Incorrect touch panel operation will occur when operating the touch panel when the backlight appears to be turned off but is actually burnt out. Note that this erroneous operation may result in damage.





Specifications:

The table below describes the parameters of the IDEC HG2G 5.7in Enhanced HG2G-5FT22TF-S Touch Screen Monitor Front Overlay HMI.

Corrosion Immunity: Free from corrosive gases
Operating Humidity: 10 to 90% RH
Product Line: HG2G 5.7in Enhanced
Storage Temperature: -20 ~ 70°C
Operating Temperature: -20 ~ 60°C
Brand: IDEC
Model Number: HG2G-5FT22TF-S
Warranty: 1-Year Warranty
Display Type: 256 Color LCD
Display Size: 5.7"


Related IDEC HMI No. :

IDEC HMI Description Inventory status
HG2G-5TN22TF-W IDEC HG2G 5.7in Enhanced Touch Screen Glass Front Overlay Replacement In Stock
HG2G-5TN22TF-W IDEC HG2G 5.7in Enhanced HMI Panel Screen Protective Film Repair Available Now
HG2G-5TT22TF-B IDEC HG2G 5.7in Enhanced Touch Digitizer Overlay Film Replacement In Stock
HG2G-5TT22TF-S IDEC HG2G 5.7in Enhanced Touch Screen Glass Protective Film Repair Available Now
HG2G-5TT22TF-W IDEC HG2G 5.7in Enhanced Touch Screen Display Front Overlay Replacement In Stock
HG2G-SB21TF-B IDEC HG2G 5.7in Enhanced Protective Film HMI Panel Screen Repair Available Now
HG2G-SB21TF-S IDEC HG2G 5.7in Enhanced Touchscreen Monitor Front Overlay Replacement In Stock
HG2G-SB21TF-W IDEC HG2G 5.7in Enhanced Touch Screen Film Protective Film Repair Available Now
HG2G-SB21VF-B IDEC HG2G 5.7in Enhanced Front Overlay Touch Monitor Replacement In Stock
HG2G-SB21VF-S IDEC HG2G 5.7in Enhanced Protective Film Touch Membrane Repair Available Now
HG2G-SB21VF-W IDEC HG2G 5.7in Enhanced Touch Screen Tablet Front Overlay Replacement In Stock
HG2G-SB22TF-B IDEC HG2G 5.7in Enhanced Front Overlay Touch Screen Panel Repair Available Now
HG2G-SB22TF-S IDEC HG2G 5.7in Enhanced Touch Screen Tablet Protective Film Replacement In Stock
IDEC HMI Description Inventory status

IDEC HG2G 5.7in Enhanced Manuals PDF Download:

  • HG2G-Brochure
  • IDEC-HG2G-Instruction-Sheet
  • IDEC-HG2G-Mounting-Adapters-Instruction-Sheet

  • FAQ:

    Question: How do I calibrate the touch screen on the HG2G-5FT22TF-S HMI?

    Answer: To calibrate the touch panel of HG2G-5FT22TF-S, go to the calibration settings in the HMI menu. Follow the on-screen instructions to touch specific calibration points accurately. This process ensures accurate touch input across the screen.


    Question: What is the main unit of HG2G-5FT22TF-S Terminal?

    Answer:
    What is the main unit of HG2G-5FT22TF-S Terminal?

    Common misspellings: 

    H2G-5FT22TF-S

    HG2G5FT22TF-S

    HGG2G-5FT22TF-S

    HG2G-5FT22TFS-

    HGG-5FT22TF-S