EZD-T8C-FC EZD-T8C-FS-RMC EZD-T8C-S EZD-T8C-SE Protective Film Touch Digitizer
- Model
- EZD-T8C-FC EZD-T8C-FS-RMC EZD-T8C-S EZD-T8C-SE
Item specifics
- Touch screen tapes
- Resistance touch screen
- Size
- 8 inch
- Warranty
- 365 Days
- Brand
- EZAutomation
- Product Line
- EZTouch (Original) EZDurapanel Series
- Supply
- EZtouch HMI Front Overlay Touch Digitizer Glass
- Shipping
- 2-4 workdays
- Part Number
- EZD-T8C-FC EZD-T8C-FS-RMC EZD-T8C-S EZD-T8C-SE
Review
Description
EZAutomation EZtouch HMI EZD-T8C-FC EZD-T8C-FS-RMC EZD-T8C-S EZD-T8C-SE Protective Film Panel Glass
Order each part separately is available
EZD-T8C-FC EZD-T8C-FS-RMC EZD-T8C-S EZD-T8C-SE Touch Panel Protective Film 8” TFT with All Serial drivers & USB
• White LED backlight
• 8” diagonal color TFT LCD
• Low-profile slim bezel design
• 0.070” thick hard surface engineered plastic touchscreen
• NEMA 4, 4X
• 640x480 pixel resolution
• 400 nits brightness
• 75,000 hour LED backlight life
• 1/4” gasket and four DIN mounting clips for NEMA 4, 4X
• 2.3” (59.0mm) installed depth
• Has all 4,000 Library symbols
• Pass-through programming to any PLC
• Remote Monitoring & Control
• Safety/Redundant Exclusive on-line editing of EZD-T8C-FC EZD-T8C-FS-RMC EZD-T8C-S EZD-T8C-SE Front Overlay Touch Digitizer Glass HMI feature built-in
• EZD-T8C-FC EZD-T8C-FS-RMC EZD-T8C-S EZD-T8C-SE Touch Screen Monitor Front Overlay HMI Screen Print command for 21 CFR part 11 (FDA)
• screen
• Programmed with EZSeries programming software
Specifications:
The table below describes the parameters of the EZAutomation EZD-T8C-FC EZD-T8C-FS-RMC EZD-T8C-S EZD-T8C-SE Touch Digitizer Protective Film HMI Parts.
| Brand: | EZAutomation |
| Brightness/Life: | 400 nits/75,000 hours |
| Enclosure: | NEMA 4, 4X (indoor) |
| Product Line: | EZtouch HMIs |
| Touch Size: | 8" |
| Display Color: | 128 colors |
| Display Type: | TFT Color |
| Power supply: | 24 V DC |
| Resolution: | 640 x 480 pixels |
| Warranty: | 12-Month Warranty |
Related EZAutomation EZTouch HMIs Series Part No. :
| EZTouch HMI | Description | Inventory status |
| EZD-T4C-FS | EZTouch HMI Front Overlay Touch Membrane Replacement | In Stock |
| EZD-T4C-FSE | EZAutomation EZTouch HMI Series Touch Glass Front Overlay Repair | In Stock |
| EZD-T4C-S | EZAutomation EZTouch HMI Series Touch Digitizer Glass Overlay Repair | Available Now |
| EZD-T4C-SE | EZTouch HMI Panel Glass Protective Film Repair Replacement | Available Now |
| EZD-T6C-FS | EZAutomation EZTouch HMI Series Touch Screen Monitor Front Overlay | In Stock |
| EZD-T6C-S | EZAutomation EZTouch HMI Series Front Overlay MMI Touch Screen Repair | In Stock |
| EZD-T6C-SE | EZAutomation EZTouch HMI Series HMI Touch Screen Protective Film | Available Now |
| EZD-T8C-FC | EZAutomation EZTouch HMI Series Protective Film Touchscreen Repair | In Stock |
| EZD-T8C-FH | EZAutomation EZTouch HMI Series HMI Protective Film Touch Screen Glass | Available Now |
| EZD-T8C-FM | EZAutomation EZTouch HMI Series Front Overlay Touch Screen Panel Repair | In Stock |
| EZD-T8C-FP | EZ Automation EZTouch HMI Series Touch Screen Protective Film Replacement | In Stock |
| EZTouch HMI | Description | Inventory status |
EZAutomation EZTouch HMIs Series HMI Manuals PDF Download:
FAQ:
Problem: EZD-T8C-FC EZD-T8C-FS-RMC EZD-T8C-S EZD-T8C-SE Display Blank
Action:
1. EZD-T8C-FC EZD-T8C-FS-RMC EZD-T8C-S EZD-T8C-SE Display indicates “NO POWER UP SCREEN” If this message is displayed the panel battery needs to be replaced.
2. Display is blank. Push extreme upper left and extreme lower left touch cells on the front of the EZD-T8C-FC EZD-T8C-FS-RMC EZD-T8C-S EZD-T8C-SE panel (top and bottom of column 1 on panel.)
a. There is no change, the display remains blank. Indicates UNIT FAILURE, return for service.
b. Unit SETUP screen appears, screen is hard to read. Adjust screen contrast control for 6- or 8-inch units (10-inch and 15-inch units have no contrast adjustment).
c. Unit SETUP screen appears normal. The EZD-T8C-FC EZD-T8C-FS-RMC EZD-T8C-S EZD-T8C-SE Touchscreen Protective Film HMI unit has no user program — install the user program.
Problem: EZD-T8C-FC EZD-T8C-FS-RMC EZD-T8C-S EZD-T8C-SE Display hangs when the unit is powered up, “Initializing...” message remains on screen (unit has invalid RAM memory)
Action:
1. Remove power. While pressing extreme upper and lower left touch cells on the panel, reapply power.
2. You will now be in setup mode, press exit to enter run mode. The EZD-T8C-FC EZD-T8C-FS-RMC EZD-T8C-S EZD-T8C-SE screen will be blank.
3. Run EZ Series EZD-T8C-FC EZD-T8C-FS-RMC EZD-T8C-S EZD-T8C-SE Touch Panel Editor Programming Software. Select Panel > Clear Memory from main menu bar, or upload a new user program to the panel.
Problem: Memory Card
Action: Make sure that the Flash Card is in top slot, and the RAM Card is in the bottom slot.
Common misspellings:
EZD-T8C-FC EZD-T8C-FS-RMC EZD-T8C-S EZD-TC-SEEZD-T8C-FC EZD-T8C-FS-RMC EZD-T8-S EZD-T8C-SE
EZD-T8C-FC EDZ-T8C-FS-RMC EZD-T8C-S EZD-T8C-SE
EZD-78C-FC EZD-T8C-FS-RMC EZD-T8C-S EZD-T8C-SE
EZD-T8C-FC EZD--T8C-FS-RMC EZD-T8C-S EZD-T8C-SE
