EZ-S8C-FSC EZ-S8C-FC HMI Touch Digitizer Protective Film
- Model
- EZ-S8C-FSC EZ-S8C-FC
Item specifics
- Touch screen tapes
- Resistance touch screen
- Size
- 8 inch
- Warranty
- 365 Days
- Brand
- EZAutomation
- Product Line
- EZtouch HMI Series
- Supply
- EZtouch HMI Touch Digitizer Glass Front Overlay
- Shipping
- 2-4 workdays
- Part Number
- EZ-S8C-FSC EZ-S8C-FC
Review
Description
EZAutomation EZtouch HMI EZ-S8C-FSC EZ-S8C-FC Protective Film HMI Panel Glass Replacement
Order each part separately is available
The Change Agent Setting a New standard for HMIs since 2001. Great Panelview, Panelview+ Replacements PV550, 900, 1200, 1200, 1450E. PV+ 600, 700, 1000, 1000E
• EZ-S8C-FSC EZ-S8C-FC Touch Panel Protective Film Terminal 20+ Exceptionally Innovative Unique Features. Still Supports DH+/RIO, Modbus+,DeviceNet, CCLink, Profibus master
List of Innovative Features
• EZ-S8C-FSC EZ-S8C-FC Front Overlay Touch Digitizer Glass HMI Patented HMI on-line edit, No downtime
• EZ mini Wifi to program/edit HMI without cable
• On-Screen Recipe Edit.
• EZiest Program Software, design time in hrs not days.
• IP protection for qualified customers.
• Full Project simulation on your EZ-S8C-FSC EZ-S8C-FC Touch Screen Monitor Front Overlay HMI PC.
• Dual PLC Drivers with automatic tag conversion.
• “C level” scripting and logic expressions.
• Fastest touch response time of any HMI.
• Best looking objects and animation with 65K colors. and the list goes on...
Specifications:
The table below describes the parameters of the EZAutomation EZ-S8C-FSC EZ-S8C-FC Protective Film Touch Digitizer HMI Parts.
| Brand: | EZAutomation |
| Brightness/Life: | 400 nits/75,000 hours |
| Enclosure: | NEMA 4, 4X (indoor) |
| Product Line: | EZtouch HMI |
| Touch Size: | 8" |
| Display View Area: | 6.05”x4.55” (153.7 x 115.8mm) |
| Display Type: | STN Color |
| Power supply: | 24 V DC |
| Resolution: | 320 x 240 pixels |
| Warranty: | 12-Month Warranty |
Related EZAutomation EZTouch HMIs Series Part No. :
| EZTouch HMI | Description | Inventory status |
| EZ-S6M-FSU | EZTouch HMI Front Overlay Touch Membrane Replacement | In Stock |
| EZ-S6M-R | EZAutomation EZTouch HMI Series Touch Glass Front Overlay Repair | In Stock |
| EZ-S6M-RMC | EZAutomation EZTouch HMI Series Touch Digitizer Glass Overlay Repair | Available Now |
| EZ-S6M-RS | EZTouch HMI Panel Glass Protective Film Repair Replacement | Available Now |
| EZ-S6W-RS | EZ Automation EZTouch HMI Series Touch Screen Monitor Front Overlay | In Stock |
| EZ-S6W-RSU | EZAutomation EZTouch HMI Series Front Overlay MMI Touch Screen Repair | In Stock |
| EZ-S8C-F | EZAutomation EZTouch HMI Series HMI Touch Screen Protective Film | Available Now |
| EZ-S8C-FC | EZAutomation EZTouch HMI Series Protective Film Touchscreen Repair | In Stock |
| EZ-S8C-FD | EZAutomation EZTouch HMI Series HMI Protective Film Touch Screen Glass | Available Now |
| EZ-S8C-FE | EZAutomation EZTouch HMI Series Front Overlay Touch Screen Panel Repair | In Stock |
| EZ-S8C-FH | EZ Automation EZTouch HMI Series Touch Screen Protective Film Replacement | In Stock |
| EZ-S8C-FM | EZTouch HMI Series Touch Panel Protective Film Repair Replacement | Available Now |
| EZTouch HMI | Description | Inventory status |
EZAutomation EZTouch HMIs Series HMI Manuals PDF Download:
FAQ:
Problem: Memory Card
Action: Make sure that the Flash Card is in top slot, and the RAM Card is in the bottom slot.
Problem: EZ-S8C-FSC EZ-S8C-FC Display Blank
Action:
1. EZ-S8C-FSC EZ-S8C-FC Display indicates “NO POWER UP SCREEN” If this message is displayed the panel battery needs to be replaced.
2. Display is blank. Push extreme upper left and extreme lower left touch cells on the front of the EZ-S8C-FSC EZ-S8C-FC panel (top and bottom of column 1 on panel.)
a. There is no change, the display remains blank. Indicates UNIT FAILURE, return for service.
b. Unit SETUP screen appears, screen is hard to read. Adjust screen contrast control for 6- or 8-inch units (10-inch and 15-inch units have no contrast adjustment).
c. Unit SETUP screen appears normal. The EZ-S8C-FSC EZ-S8C-FC Touchscreen Protective Film HMI unit has no user program — install the user program.
Problem: EZ-S8C-FSC EZ-S8C-FC Display hangs when the unit is powered up, “Initializing...” message remains on screen (unit has invalid RAM memory)
Action:
1. Remove power. While pressing extreme upper and lower left touch cells on the panel, reapply power.
2. You will now be in setup mode, press exit to enter run mode. The EZ-S8C-FSC EZ-S8C-FC screen will be blank.
3. Run EZ Series EZ-S8C-FSC EZ-S8C-FC Touch Panel Editor Programming Software. Select Panel > Clear Memory from main menu bar, or upload a new user program to the panel.
Common misspellings:
EZ-S8C-FSC EZ-SC-FCEZ-S8C-FS EZ-S8C-FC
EZS-8C-FSC EZ-S8C-FC
EZ-S8C-FSC EZ-SBC-FC
EZ-S8C-FSC EZ-S8C-FFC
