3384101-01 FP2650-T41 Pro-face Overlay Touch Membrane
3384101-01 FP2650-T41 Pro-face Overlay Touch Membrane
Model
3384101-01 FP2650-T41

Item specifics

Touch screen panel type
Resistance touch screen
Size
12.1 inch
Brand
Proface
Warranty
365 Days
Product Line
Proface FP2000 Series
Supply
FP-2500 Touch Digitizer Glass Front Overlay
Shipping
2-4 workdays
Part Number
3384101-01 FP2650-T41

Review

Description

Proface FP2000 3384101-01 FP2650-T41 Touch Digitizer Glass Protective Film Repair


Proface FP2000 FP-2500 3384101-01 FP2650-T41 Touch Screen Panel Front Overlay Repair Replacement

Notes on the FP 3384101-01 FP2650-T41 Touchscreen Panel Protective Film unit's Liquid Crystal Display (LCD)
• The FP 3384101-01 FP2650-T41 Front Overlay Touch Digitizer Glass unit's LCD contains a strong irritant. If the panel is damaged and the LCD unit's liquid contacts your skin, be sure to wash it with running water for at least 15 minutes. If any of this liquid should enter your eye, be sure to flush the eye with running water for more than 15 minutes and see a doctor immediately.
• The brightness of the LCD screen will depend on the screen's current display and the LCD unit's contrast adjustment. Any brightness variations that result are normal for 3384101-01 FP2650-T41 LCD displays.
• There are minute grid points on the 3384101-01 FP2650-T41 LCD surface. These points are not defects.
• The displayed color will look different when viewed from an angle outside the specified view angle. This is also normal.
• Displaying a single screen image for long periods of time can cause an afterimage to remain. To correct this, turn the 3384101-01 FP2650-T41 Protective Film Touch Screen Monitor unit OFF for 5 or 10 minutes, then turn it ON again. This phenomenon is a common attribute of the LCD units and not a defect. To prevent this effect, you can:
- use the Display OFF feature, if the same image is to be displayed for a long period of time.
- change the screen display periodically to prevent the displaying of a single image for a long period of time.




Specifications:

The table below describes the parameters of the Proface FP-2500 3384101-01 FP2650-T41 Protective Film Touch Digitizer HMI Machine.

Ambient Humidity: 30 to 90%RH (no condensation)
Backlight: CCFL
Brand: Proface
Product Line: Proface FP2000
Touch Size: 12.1"
Display Colors: 262,144 colors
Display Type: TFT Color LCD
Power Supply: 24 V DC
Model Number: 3384101-01 FP2650-T41
Warranty: 12-Month Warranty


Related Proface FP2000 Series Part No. :

Pro-face FP2000 Description Inventory status
FP2500-T11 Proface FP2000 Protective Film Touch Screen Replacement In Stock
FP2500-T12 Proface FP2000 Touch Panel Protective Film Repair Available Now
FP2500-T41 Proface FP2000 Touchscreen Protective Film Repair In Stock
FP2500-T41-24V Proface FP2000 HMI Protective Film Touch Screen Glass Available Now
FP2500-T42-24V Proface FP2000 Touch Screen Panel Front Overlay Repair In Stock
FP2600-T11 Pro-face FP2000 Front Overlay Touch Membrane In Stock
FP2600-T12 Proface FP2000 Touch Glass Front Overlay Repair In Stock
FP2600-T41 Proface FP2000 Touch Digitizer Glass Overlay Repair Available Now
FP2600-T41-24V Pro-face FP2000 HMI Panel Glass Protective Film Repair Available Now
FP2600-T42-24V Proface FP2000 Touch Screen Monitor Front Overlay In Stock
FP2650-T41 Proface FP2000 Front Overlay MMI Touch Screen Replacement In Stock
Proface FP2000 Description Inventory status


Proface FP2000 Series HMI Manuals PDF Download:

  • FP-2500 FP-2600 Series User Manual
  • FP2000 Series Datasheet
  • FP2500-T11 FP2600-T11 Installation Guide
  • FP2500-T11 User Manual
  • FP2500-T12 FP2600-T12 Installation Guide
  • FP2600-T11 User Manual
  • FP2600-T41 Datasheet
  • FP2600-T41 User Manual
  • FP2650-T41 Installation Guide

  • FAQ:

    Question: Installation Gasket Replacement Procedure

    Solution:
    1) Place the 3384101-01 FP2650-T41 Touch Membrane Front Overlay FP on a flat, level surface with the display facing downwards.
    2) Remove the old gasket from the 3384101-01 FP2650-T41 Protective Film HMI Panel Glass FP.
    3) Attach the new gasket to the 3384101-01 FP2650-T41 Touch Screen Panel Overlay FP. Be sure to insert the gasket into the FP unit's groove so that the gasket's groove sides are vertical.
    4) Check if the gasket is attached to the FP correctly. The upper surface of the gasket should protrude approximately 2mm out from the groove.
    Installation Gasket Replacement Procedure


    Question: What is the display size of Proface FP2000 3384101-01 FP2650-T41 Protective Film HMI Panel Glass?

    Answer: The FP-2500 3384101-01 FP2650-T41 Touchscreen Panel Front Overlay is 12.1 inch.

    Common Misspellings: 

    3384101-01 FP250-T41
    338410-01 FP2650-T41
    33841010-1 FP2650-T41
    3384101-01 FP2b50-T41
    33841001-01 FP2650-T41