3280033-01 FP2500-T12 Pro-face Touch Glass Front Overlay
3280033-01 FP2500-T12 Pro-face Touch Glass Front Overlay
Model
3280033-01 FP2500-T12

Item specifics

Brand
Proface
Size
10.4 inch
Warranty
365 Days
Product Line
Proface FP2000 Series
Supply
FP-2500 Touch Digitizer Glass Front Overlay
Shipping
2-4 workdays
Part Number
3280033-01 FP2500-T12

Review

Description

Proface FP2000 3280033-01 FP2500-T12 Touch Digitizer Glass Protective Film Repair


Proface FP2000 FP-2500 3280033-01 FP2500-T12 Touch Screen Panel Front Overlay Repair Replacement

Notes on the FP 3280033-01 FP2500-T12 Touchscreen Panel Protective Film unit's Liquid Crystal Display (LCD)
• The FP 3280033-01 FP2500-T12 Front Overlay Touch Digitizer Glass unit's LCD contains a strong irritant. If the panel is damaged and the LCD unit's liquid contacts your skin, be sure to wash it with running water for at least 15 minutes. If any of this liquid should enter your eye, be sure to flush the eye with running water for more than 15 minutes and see a doctor immediately.
• The brightness of the LCD screen will depend on the screen's current display and the LCD unit's contrast adjustment. Any brightness variations that result are normal for 3280033-01 FP2500-T12 LCD displays.
• There are minute grid points on the 3280033-01 FP2500-T12 LCD surface. These points are not defects.
• The displayed color will look different when viewed from an angle outside the specified view angle. This is also normal.
• Displaying a single screen image for long periods of time can cause an afterimage to remain. To correct this, turn the 3280033-01 FP2500-T12 Protective Film Touch Screen Monitor unit OFF for 5 or 10 minutes, then turn it ON again. This phenomenon is a common attribute of the LCD units and not a defect. To prevent this effect, you can:
- use the Display OFF feature, if the same image is to be displayed for a long period of time.
- change the screen display periodically to prevent the displaying of a single image for a long period of time.




Specifications:

The table below describes the parameters of the Proface FP-2500 3280033-01 FP2500-T12 Protective Film Touch Digitizer HMI Machine.

Ambient Humidity: 30 to 90%RH (no condensation)
Backlight: CCFL
Brand: Proface
Product Line: Proface FP2000
Touch Size: 10.4"
Display Colors: 262,144 colors
Display Type: TFT Color LCD
Power Supply: 24 V DC
Model Number: 3280033-01 FP2500-T12
Warranty: 12-Month Warranty


Related Proface FP2000 Series Part No. :

Pro-face FP2000 Description Inventory status
FP2500-T11 Proface FP2000 Protective Film Touch Screen Replacement In Stock
FP2500-T12 Proface FP2000 Touch Panel Protective Film Repair Available Now
FP2500-T41 Proface FP2000 Touchscreen Protective Film Repair In Stock
FP2500-T41-24V Proface FP2000 HMI Protective Film Touch Screen Glass Available Now
FP2500-T42-24V Proface FP2000 Touch Screen Panel Front Overlay Repair In Stock
FP2600-T11 Pro-face FP2000 Front Overlay Touch Membrane In Stock
FP2600-T12 Proface FP2000 Touch Glass Front Overlay Repair In Stock
FP2600-T41 Proface FP2000 Touch Digitizer Glass Overlay Repair Available Now
FP2600-T41-24V Pro-face FP2000 HMI Panel Glass Protective Film Repair Available Now
FP2600-T42-24V Proface FP2000 Touch Screen Monitor Front Overlay In Stock
FP2650-T41 Proface FP2000 Front Overlay MMI Touch Screen Replacement In Stock
Proface FP2000 Description Inventory status


Proface FP2000 Series HMI Manuals PDF Download:

  • FP-2500 FP-2600 Series User Manual
  • FP2000 Series Datasheet
  • FP2500-T11 FP2600-T11 Installation Guide
  • FP2500-T11 User Manual
  • FP2500-T12 FP2600-T12 Installation Guide
  • FP2500-T41 User Manual
  • FP2500-T42-24V FP2600-T42-24V Installation Guide

  • FAQ:

    Question: What is the display size of Proface FP2000 3280033-01 FP2500-T12 Protective Film HMI Panel Glass?

    Answer: The FP-2500 3280033-01 FP2500-T12 Touchscreen Panel Front Overlay is 10.4 inch.


    Question: Calibration Procedure

    Solution:
    1) Double click on the [Stylus] icon (Control Panel).
    2) Select the [Calibration] tab.
    3) Click the [Recalibrate] button.
    4) Click on and hold the + mark that appears on the center of the screen. When the coordinates are recognized, the + mark will move in order from the center to the top left, bottom left, bottom right, and top right. Click on and hold the + mark at each point
    Calibration Procedure

    Common Misspellings: 

    3280033-01 FP2500-12
    3280033-1 FP2500-T12
    328003-301 FP2500-T12
    3280033-01 FP2500-712
    3280033-011 FP2500-T12