6AV7230-0DA20-1CA0 IPC377E Touchscreen Protective Film
6AV7230-0DA20-1CA0 IPC377E Touchscreen Protective Film
6AV7230-0DA20-1CA0 IPC377E Touchscreen Protective Film
6AV7230-0DA20-1CA0 IPC377E Touchscreen Protective Film
6AV7230-0DA20-1CA0 IPC377E Touchscreen Protective Film
6AV7230-0DA20-1CA0 IPC377E Touchscreen Protective Film
Model
6AV7230-0DA20-1CA0

Item specifics

Brand
Siemens
Warranty
365 Days
Product Line
IPC 377E
Supply
IPC 377E HMI Touch Screen and Overlay
Size
15 inch
Name
6AV7 230-0DA20-1CA0

Review

Description

6AV7230-0DA20-1CA0 Siemens SIMATIC HMI IPC377E 15 Touch Screen Digitizer Front Overlay Repair Replacement

Order each part separately is available

6AV7230-0DA20-1CA0 Siemens SIMATIC HMI IPC377E 15 Touch Screen Panel Protective Film Repair Replacement

The degrees of protection of 6AV7 230-0DA20-1CA0 Touch Screen Glass Protective Film Siemens SIMATIC HMI IPC377E 15 can only be guaranteed if the following requirements are met:
● In order to achieve IP65 protection degree or NEMA type4X/type12, the material thickness for the mounting cutout should be: 2 mm to 6 mm
● Permissible deviation from plane at the mounting cutout: ≤ 0.5 mm This condition must be fulfilled for the mounted device
● Permissible surface roughness in the area of the seal: ≤ 120 µm (Rz 120)

The 6AV72300DA201CA0 Touchscreen Protective Film Siemens SIMATIC HMI IPC377E 15 has been designed for use in a normal industrial environment in accordance with IEC 60721-3-3 (pollutant class 3C2 for chemical influences, 3S2 for sand and dust). You can also fasten the 6AV7 230-0DA20-1CA0 Touchscreen Protective Film Siemens SIMATIC HMI IPC377E 15 using a VESA (Video Electronics Standards Association) adapter. Different models of VESA adapters are offered by third-party manufacturers. The 6AV7230-0DA20-1CA0 HMI Touch Screen Protective Film Siemens SIMATIC HMI IPC377E 15 is VESA compliant and can be mounted on all kinds of applications utilizing the standard VESA100 mounting interfaces. Fasten the VESA adapter with the designated screws (M4).





Specifications:

The table below describes the parameters of the 6AV7 230-0DA20-1CA0 Siemens IPC 377E Spare Parts.

Type of memory: DDR3L
Mains buffering: 10ms
Processor type: Intel Celeron N3160
Storage temperature: -20℃-60℃
Operation temperature: 0℃-40℃
Part Number: 6AV7230-0DA20-1CA0
Size: 15 inch
Type of supply voltage: 24 V DC
Warranty: 365 days Warranty
Product Line: Siemens IPC 377E


Related Siemens Simatic IPC 377E 15" No. :

Siemens IPC377E Description Inventory status
6AV7230-0DA20-0BA0 IPC377E SIEMENS HMI Touch Screen Front Overlay Available Now
6AV7230-0DA20-0CA0 IPC 377E Touch Panel Glass Front Overlay Replacement Available Now
6AV7230-0DA20-1BA0 IPC 377E Siemens Overlay Touch Screen Monitor In Stock
6AV7230-0DA20-1CA0 SIMATIC IPC377E Front Overlay Touch Screen Hmi Available Now
6AV7230-0DA20-2BA0 Siemens IPC377E Touch Panel Glass Protective Film In Stock
6AV7230-0DA20-2CA0 SIEMENS IPC 377E Protective Film Touch Screen In Stock
Simatic IPC377E Description Inventory status

Siemens IPC 377E HMI Manuals PDF Download:

  • 6AV7230-0DA20-1CA0 Siemens IPC 377E datasheet pdf
  • 6AV7230-0DA20-2BA0 Siemens IPC 377E datasheet pdf
  • 6AV7230-0DA20-2CA0 Siemens IPC 377E datasheet pdf
  • Siemens Simatic IPC 377E Operating Instructions

  • FAQ:

    Question: What is the dispaly size of Siemens SIMATIC IPC377E 15 6AV7230-0DA20-1CA0 Protective Film HMI Panel Glass?

    Answer: The IPC377E 15 6AV72300DA201CA0 Touch Screen Panel Protective Film is 15 inch.


    Question: How to Connect the Siemens SIMATIC 6AV72300DA201CA0 HMI IPC377E 15?

    Answer:
    1.Switch off the 24 VDC power supply.
    2.Connect the wires of the power supply.
    3.Connect the connection terminal at the marked position.
    How to Connect the Siemens SIMATIC 6AV7230-0DA20-1CA0 HMI IPC377E 15?

    Common misspellings: 

    6AV7230-0D20-1CA0
    A6V7230-0DA20-1CA0
    6AV2730-0DA20-1CA0
    6AV7230-0DA02-1CA0
    6AV7230-0DA20-1CCA0