6AV7230-0EA20-0CA0 Siemens IPC377E 19 Overlay Touch
6AV7230-0EA20-0CA0 Siemens IPC377E 19 Overlay Touch
6AV7230-0EA20-0CA0 Siemens IPC377E 19 Overlay Touch
6AV7230-0EA20-0CA0 Siemens IPC377E 19 Overlay Touch
Model
6AV7230-0EA20-0CA0

Item specifics

Brand
Siemens
Warranty
365 Days
Product Line
IPC 377E
Supply
IPC 377E HMI Touch Panel and Overlay
Size
19 inch
Name
6AV72300EA200CA0

Review

Description

6AV7230-0EA20-0CA0 Siemens SIMATIC HMI IPC377E 19 Touch Screen Panel Overlay Repair Replacement

Order each part separately is available

6AV7230-0EA20-0CA0 Siemens SIMATIC HMI IPC377E 19 Touch Screen Panel Protective Film Repair Replacement

Electric shock and risk of fire.
High voltage may be present in a defective the Siemens SIMATIC 6AV7230-0EA20-0CA0 Touch Screen Display Front Overlay HMI IPC377E 19 device, which can cause fire or an electric shock if touched. Death and serious bodily injury can result.
● Connect the 6AV7 230-0EA20-0CA0 Touch Screen Glass Front Overlay Siemens SIMATIC HMI IPC377E 19 device to the function earth before you put it into operation.
● The FE terminal on the Siemens SIMATIC 6AV72300EA200CA0 Touch Screen Digitizer Protective Film HMI IPC377E 19 device must be connected to the function conductor of the control cabinet or system in which the Siemens SIMATIC 6AV7230-0EA20-0CA0 Touchscreen Protective Film HMI IPC377E 19 device is installed.
● Never operate the 6AV7 230-0EA20-0CA0 Touch Screen Panel Overlay Siemens SIMATIC HMI IPC377E 19 device without function earth.
● If a 6AV7230-0EA20-0CA0 Touch Screen monitor Front Overlay Siemens SIMATIC HMI IPC377E 19 device is defective, remove it from operation without delay and label it accordingly.

The Siemens SIMATIC 6AV7 230-0CA20-0CA0 Touch Screen Digitizer Protective Foil HMI IPC377E 19 has been designed for use in a normal industrial environment in accordance with IEC 60721-3-3 (pollutant class 3C2 for chemical influences, 3S2 for sand and dust). If the 6AV72300EA200CA0 Touch Screen Panel Overlay Siemens SIMATIC HMI IPC377E 19 is subjected to low temperatures or extreme fluctuations in temperature during transportation, for example in cold weather, moisture could build up on or inside the device. Moisture causes a short circuit in electrical circuits and damages the device.

You can also fasten the 6AV7 230-0CA20-0CA0 Touch Screen monitor Protective Film Siemens SIMATIC HMI IPC377E 19 using a VESA (Video Electronics Standards Association) adapter. Different models of VESA adapters are offered by third-party manufacturers. The Siemens SIMATIC 6AV72300EA200CA0 Touch Screen Glass Protective Film HMI IPC377E 19 is VESA compliant and can be mounted on all kinds of applications utilizing the standard VESA100 mounting interfaces. Fasten the VESA adapter with the designated screws (M4).





Specifications:

The table below describes the parameters of the 6AV7230-0EA20-0CA0 Siemens IPC 377E Spare Parts.

Mains buffering: 10ms
Part Number: 6AV7230-0EA20-0CA0
Processor type: Intel Celeron N3160
Storage temperature: -20℃-60℃
Type of memory: DDR3L
Operation temperature: 0℃-40℃
Product Line: Siemens IPC 377E
Size: 19 inch
Type of supply voltage: 24 V DC
Warranty: 365 days Warranty


Related Siemens Simatic IPC 377E 19" No. :

Siemnens IPC377E Description Inventory status
6AV7230-0EA20-0BA0 Siemnens IPC 377E Touch Screen Panel Glass Protective Film In Stock
6AV7230-0EA20-0CA0 IPC377E Touch Panel Glass Front Overlay Replacement Available Now
6AV7230-0EA20-1BA0 Siemnens IPC377E Touch Screen Panel Front Overlay Repair Kit In Stock
6AV7230-0EA20-1CA0 Simatic IPC 377E Touch Digitizer Overlay Replacement In Stock
6AV7230-0EA20-2BA0 IPC377E HMI Touch Screen Organizer Protective Film In Stock
6AV7230-0EA20-2CA0 IPC 377E Touch Panel Protective Film Overlay Repair In Stock
Simatic IPC377E Description Inventory status

Siemens IPC 377E HMI Manuals PDF Download:

  • 6AV7230-0EA20-0CA0 Siemens IPC 377E datasheet pdf
  • 6AV7230-0EA20-1BA0 Siemens IPC 377E datasheet pdf
  • 6AV7230-0EA20-1CA0 Siemens IPC 377E datasheet pdf
  • Siemens Simatic IPC 377E Operating Instructions

  • FAQ:

    Question: How to switch on the 6AV7 230-0CA20-0CA0 HMI Touch Screen Protective Film Siemens SIMATIC HMI IPC377E 19?

    Answer:
    1.Press the on/off switch.The module carries out a self-test. During the self-test, the following message appears:Press ESC for boot options
    2. Wait for the message to disappear.
    3. Follow the instructions on the screen.
    4. Make the region and language settings.If you want your system language to be international, select English. For information on changing the region and language settings at a later point in time, refer to the section Installing the software.


    Question: How to replace the drive of a 6AV72300EA200CA0 Siemens SIMATIC HMI IPC377E 19 Touch Screen Panel Front Overlay basic device?

    Answer:
    1. Pull out the connection plug.
    2. Lay down the Siemens SIMATIC 6AV72300EA200CA0 Touch Screen Glass Front Overlay HMI IPC377E 19 device's rear panel including the drive.
    How to replace the drive of a 6AV7230-0EA20-0CA0 Siemens SIMATIC HMI IPC377E 19 HMI Touch Screen Front Overlay basic device?
    3.Remove the indicated screws.
    4.Take out the HDD.
    How to replace the drive of a 6AV7230-0EA20-0CA0 Siemens SIMATIC HMI IPC377E 19 Touch Screen Panel Protective Foil basic device?

    Common misspellings: 

    6AV730-0EA20-0CA0
    6A7V230-0EA20-0CA0
    6AV7230-E0A20-0CA0
    6AV7230-0E2A0-0CA0
    6AV72330-0EA20-0CA0