Panasonic AIGT0232H1 GT01R Touch Glass Protective Film
- Model
- AIGT0232H1
Item specifics
- Brand
- Panasonic
- Size
- 3 inch
- Warranty
- 365 Days
- Product Line
- Panasonic GT01 Series
- Supply
- GT01R AIGT0232H1 Touch Screen and Front Overlay
- Part Number
- AIGT0232H1
- Shipping
- 2-4 workdays
Review
Description
Panasonic GT01 GT01R AIGT0232H1 Front Overlay Touch Panel Replacement
Order each part separately is available
Precautions when connecting Panasonic GT AIGT0232H1
-If noise is a problem, use a shielded cable and employ countermeasures such as installing a ferrite core if necessary. Also, take measures so that the shielding doesn't peel off and noise such as static electricity does not interfere.
-The number of AIGT0232H1 Touch Screen Panel Glass Front Overlay units, transmission distance and baud rate may differ depending on the device connected. Verify with the AIGT0232H1 Touch Panel Protective Film device being used.
-The maximum cable length for RS232C type is 15 m, also RS422 (5 V) type is 30 m.
-The maximum transmission distance is 500 m for the 24 V RS422 type.
-When connecting to the RS485, it may not be connected depending on the timing for switching between the transmission and reception at the external device. Please check it using the actual equipment.
The Panasonic GT01 GT01R AIGT0232H1 Protective Film Touch Digitizer Glass terminal unit setting varies according to the external device to be connected. Confirm it before setting a AIGT0232H1 HMI Panel Glass Front Overlay terminal unit.
Specifications:
The table below describes the parameters of the Panasonic GT01R AIGT0232H1 Touch Screen Monitor Front Overlay HMI Parts.
Backlight: | 3-color LED |
Brand: | Panasonic |
Warranty: | 365 Days |
Product Line: | Panasonic GT01R |
Resolution: | 128 (W) × 64 (H) dots |
Ambient temperature: | 0 to +50 °C +32 to +122 °F |
Display Type: | STN monochrome LCD |
Part Number: | AIGT0232H1 |
Power supply: | 5 V DC |
Touch Size: | 3" |
Related Panasonic GT Series HMI Part No. :
Panasonic GT01R | Description | Inventory status |
AIGT0230B | Panasonic GT01R Touch Screen Protective Film Replacement | In Stock |
AIGT0230B1 | Panasonic GT01R Touch Panel Protective Film Repair | Available Now |
AIGT0230H | Panasonic GT01R Touchscreen Protective Film Repair | In Stock |
AIGT0230H1 | Panasonic GT01R HMI Touch Screen Glass Protective Film | Available Now |
AIGT0232B | Panasonic GT01R Touch Screen Panel Front Overlay Repair | In Stock |
AIGT0232B1 | Panasonic GT01R Front Overlay Touch Membrane | In Stock |
AIGT0232H | Panasonic GT01R Touch Glass Front Overlay Repair | In Stock |
AIGT0232H1 | Panasonic GT01R Touch Digitizer Glass Overlay Repair | Available Now |
Panasonic GT01R | Description | Inventory status |
Panasonic GT Series HMI Manuals PDF Download:
FAQ:
Question: What to DO If Panasonic GT01R AIGT0232H1 Touch Screen is blank?
Answer:
1) Power is not on.
Supply the power supply to the Panasonic GT01R AIGT0232H1 Touch Digitizer Glass Protective Film unit as per specifications.
2) (When only lamp and message parts are configured to the base screen) Value of substitute reference device value does not exist in substitute data.
Check the address of the substitute reference device and the device values on the PLC side.
Question: What to DO If Panasonic GT01R AIGT0232H1 Touch Screen Panel is dim?
Answer:
1) The power voltage may be low.
Check the capacity of the power supply unit if it is enough for the GT's power consumption.
2) The contrast is set too low.
Bring up the system menu and adjust the contrast.
3) The backlight brightness is set too dark.
Bring up the system menu and adjust the brightness.
4) The backlight is off due to the [Backlight Auto-off] setting in the [Setup] of the GT configuration settings in GTWIN.
Touching any area of the GT01R AIGT0232H1 screen lights that area. If a switch part is set on the touched area, the area will not light even if touched. To change the setting, change the content of the backlight auto-off settings.
Common misspellings:
AIGT023H1AGT0232H1
AIGT0322H1
AIGTo232H1
AIGT0232H11