UniOP eTOP32R HMI Touch Screen Front Overlay
UniOP eTOP32R HMI Touch Screen Front Overlay
UniOP eTOP32R HMI Touch Screen Front Overlay
UniOP eTOP32R HMI Touch Screen Front Overlay
UniOP eTOP32R HMI Touch Screen Front Overlay
Model
eTOP32R

Item specifics

Brand
UniOP
Warranty
365 Days
Product Line
UniOP eTOP series
Supply
eTOP32R Protective Film Touch Screen Repair
Size
9.6 inch

Review

Description

UniOP eTOP series HMI eTOP32R Touch Screen Panel Front Overlay Repair


UniOP series HMI eTOP32R Touchscreen Front Overlay Repair Kit

eTOP32R Touch Screen Protective Film IHM Highlights
• 9.6” diagonal graphic monochrome LCD display
• Available in TFT color, and monochrome
• VGA (640x480 pixels) resolution
• Shows up to 30 rows, 80 characters of information
• Resistive eTOP32R touch screen
• Connection to industrial bus systems and Ethernet (requires optional plug-in modules)
• Compatible with HMIcontrol and local I/O subsystems
• Large memory size (8 MB Flash) on removable media
• IP65 front panel protection
• Programmable with UniOP Designer version 5.08


The eTOP30, and 32 eTOP32R HMI Panel Glass Front Overlay Terminal are state-of-the-art HMI devices with a touch screen interface and a 10.4” graphic display (9.6” for monochrome version). The novel aluminum bezel offers a rugged and convenient flat design and an appealing look.





Specifications:

The table below describes the parameters of the eTOP32R UniOP Touchscreen Overlay.

Part Number: eTOP32R
Display Type: Monochrome LCD
Resolution: 640x480 pixel
Backlight: CCFL
Warranty: 365 Days
Input Power: 24VDC (+10%, -15%)
Operating Temperature: 0 to 45 °C
Display Size: 9.6 in
Touch screen: Resistive
Product Line: UniOP eTOP series


Related UniOP Series Part No. :

UniOP eTOP Description Inventory status
eTOP19C-0050 UniOP eTOP Touch Screen Monitor Overlay Repair In Stock
eTOP19CP-0052 Touch Screen Protective Film UniOP eTOP eTOP19CP Available Now
eTOP20B-0045 UniOP eTOP20B Touch Screen Glass Front Overlay In Stock
eTOP20C-0050 UniOP eTOP eTOP20C Touch Protective Film In Stock
eTOP21B-0045 UniOP eTOP21B Touch Screen Overlay Replacement In Stock
eTOP30-0050 HMI Panel Glass Overlay eTOP eTOP30 Repair Available Now
eTOP31 UniOP eTOP Front Overlay Touch Panel Glass In Stock
eTOP32-0050 UniOP eTOP Touch Screen Protective Film Repair Available Now
eTOP32B-0050 UniOP eTOP32B Touch Digitizer Protective Film In Stock
eTOP32R HMI Panel Glass Overlay eTOP eTOP32R Repair Available Now
eTOP33-0050 UniOP eTOP33 HMI Panel Glass Front Overlay In Stock
eTOP33B-0050 UniOP eTOP eTOP33B Touch Protective Film In Stock
eTOP33C-0050 HMI Panel Glass Overlay eTOP eTOP33C Repair Available Now
eTOP33C-0350 Touch Screen Protective Film UniOP eTOP eTOP33C Available Now
Exor UniOP HMI Description Inventory status


Exor UniOP eTOP HMI Manuals PDF Download:

  • UniOP eTOP30, eTOP32 User Manuals
  • UniOP eTOP33 User Manuals
  • UniOP eTOP33B User Manuals
  • UniOP eTOP33C User Manuals
  • UniOP eTOP39B User Manuals
  • UniOP eTOP40B User Manuals
  • UniOP eTOP40C User Manuals
  • UniOP eTOP49C User Manuals
  • UniOP eTOP50B User Manuals
  • UniOP eTOP50C User Manuals
  • UniOP eTOP59CP User Manuals

  • FAQ:

    Question: How to cleaning eTOP32R Touch Panel Glass Overlay IHM faceplates?

    Answer: The equipment must be cleaned only with a soft cloth and neutral soap product. Do not use solvents.


    Question: What is Exor UniOP eTOP32R Touchscreen Calibration?

    Answer:

  • Standard calibration:
  • 1. Recall Configuration Mode
  • 2. Touch the CLEAR key on the eTOP32R screen until a small round symbol will appear on the top right corner of the screen
  • 3. touch and hold the symbol until it will move to the low left corner of the eTOP32R screen
  • 4. touch and hold the symbol until the indication to touch the ← key will be displayed on the screen
  • 5. touch and hold the key ← until the indication to touch the ↓ key will be displayed on the screen
  • 6. touch and hold the key ↓ until the indication to touch the Enter key will be displayed on the screen
  • 7. touch and hold the Enter key until the panel will switch to Operation Mode (if a valid project is loaded in the memory)
  • Emergency calibration.
  • The Emergency calibration procedure should be used in all cases when it would result not possible to go to calibration using the standard procedure.
  • 1. Switch of the unit
  • 2. turn on the unit
  • 3. tap in the middle of the touchscreen with a frequency of about one second until the operator panel will enter the Calibration Mode
  • 4. perform the standard calibration procedure.

  • Common misspellings: 

    eTOP2R
    TOP32R
    eTOP23R
    eT0P32R
    eTOP332R