B&R 5D5213.01 Provit 5200 Touch Screen Replacement
B&R 5D5213.01 Provit 5200 Touch Screen Replacement
B&R 5D5213.01 Provit 5200 Touch Screen Replacement
Model
5D5213.01

Item specifics

Brand
B&R
Warranty
1 Year VICPAS Warranty
Model
B&R Provit 5200 5D5213.01
Shipping
DHL/FedEx/UPS/TNT/EMS/Aramex /DPEX
Size
13.8 inch

Review

Description

B&R Provit 5200 5D5213.01 Touch Panel Repair Replacement

Provit 5200 5D5213.01 Touchscreen Glass

It is possible to operate an B&R Provit 5200 5D5213.01 external graphics card in a PCI slot on the mainboard. If such a B&R Provit 5200 5D5213.01 card has been inserted, it is automatically recognized during the B&R Provit 5200 5D5213-01 start-up procedure and the onboard VGA controller automatically switches itself off. It is not possible to switch the B&R Provit 5200 5D5213.01 VGA controller on and off manually.


The B&R Provit 5200 5D5213-01 lithium battery (3 V, 950 mAh) keeps the B&R Provit 5200 5D5213.01 CMOS memory and real-time clock running when the supply voltage for the IPC has been switched off. The buffer duration of the battery is at least 4 years (at 50°C, 8.5 mA current requirements of the supplied components and a self-discharge of 40%). The reset button is accessible through a small hole near the external floppy disk drive interface. In order to avoid accidental activation, a B&R Provit 5200 5D5213.01 reset can only be triggered with a pointed object.



  Contact Best Price  


Specifications:

The table below describes the parameters of the 5D5213.01 Provit 5200 Touchscreen Panel.

Part Number : 5D5213.01
Product Line:Provit 5200
Warranty: 365 Days Warranty
Input Power24 VDC
Display Type:TFT color
Mounting position: Vertical
Input Type: Touchscreen
Serial interface Type:RS232


Related Provit Series Part No. :

B&R Provit Description Inventory status
5D5200.04 B&R Provit 5200 Touch Digitizer Glass In Stock
5D5202.01 Provit 5200 B and R Touch Screen Panel Available Now
5D5202.03 B&R Provit 5200 HMI Touch Glass Repair In Stock
5D5212.01 Provit 5200 B and R Touch Digitizer Glass Available Now
5D5202.05 Provit 5200 B and R Touch Screen Monitor In Stock
5D5212.02 B&R Provit 5200 Touch Screen Protective Film In Stock
5D5212.04 B&R Provit 5200 Touch Screen Glass Repair In Stock
5D5212.26 Provit 5200 B and R Touch Digitizer Glass Available Now
5D5213.01 B and R Provit 5200 HMI Panel Glass Repair Available Now
5D5213.02 B&R Provit 5200 Touch Screen Monitor Available Now
5D5501.20 Provit 5500 B&R Keyboard Membrane Touch Screen In Stock
B and R Provit Description Inventory status

FAQ:

Question: When does a B&R Provit 5200 5D5213.01 BIOS upgrade become necessary?

Answer: An Provit 5200 5D5213.01 upgrade might be necessary for several reasons:
• BIOS was destroyed or damaged and the IPC can no longer be booted.
• To upgrade functions implemented in BIOS Setup or to add new functions or components.
• To guarantee that the MTC function libraries run on Provit 5000 IPCs.


Question:How to replace the B&R Provit 5200 5D5213.01 processor fan?

Answer:
How to replace the B&R Provit 5200 5D5213.01 processor fan?
1) Disconnect the power supply.
2) Touch the housing or ground connection (not the power supply!) in order to discharge any electrostatic charge from your body.
3) Open the device.
4) Loosen screws and unplug the fan's power supply. Remove fan.
How to replace the B&R Provit 5200 5D5213.01 processor fan?
5) Set the replacement fan on the heat sink at a slight angle (see image). Place the screws in the specified order and (using a Phillips head screwdriver) tighten as shown in the following image (1, 2, 3). Use three of the screws from the previously removed fan. Connect the fan's power supply.
How to replace the B&R Provit 5200 5D5213.01 processor fan?
6) Close the device.
7) Connect the lines to the power supply.


Question: What measures can be taken against preventing after-image effect in Provit 5200 5D5213.01 LCD/TFT monitors?

Answer: There is no total solution; however, measures can be taken to significantly reduce this effect:
• Avoid static pictures or screen content
• Use screen savers (moving) when the display is not in use
• Frequent picture change
• Shut off the display when not in use
Turning off the background lighting (backlight) does not influence the prevention of the afterimage effect.

Common misspellings: 

5D5213.1

5D523.01

5D52l3.01

5D5213.O1

5D55213.01