B&R 5D5600.01 Provit 5600 Membrane Keyboard Keypad
- Model
- 5D5600.01
Item specifics
- Brand
- B&R
- Size
- 10.4 inch
- Warranty
- 1 Year VICPAS Warranty
- Model
- B&R Provit 5600 5D5600.01
- Shipping
- DHL/FedEx/UPS/TNT/EMS/Aramex /DPEX
Review
Description
B&R Provit 5600 5D5600.01 Operator Panel Keypad Repair Replacement
Order each part separately is available
The B&R Provit 5600 5D5600.01 lithium battery (3 V, 950 mAh) keeps the CMOS memory and real-time clock running when the supply voltage for the B&R Provit 5600 5D5600-01 IPC has been switched off. The buffer duration of the battery is at least 4 years (at 50°C, 8.5 mA current requirements of the supplied components and a self-discharge of 40%). The B&R Provit 5600 5D5600.01 reset button is accessible through a small hole near the external floppy disk drive interface. In order to avoid accidental activation, a B&R Provit 5600 5D5600.01 reset can only be triggered with a pointed object.
In the IPC5600/IPC5600C, 5D5600.01 BIOS enables the LS120 drives (which are actually IDE devices such as CD-ROM drives) to operate like a disk drive (drive letter A or B). However, it is only possible to use standard diskettes (360 KB, 720 KB, 1.44 MB) with the LS120 drive. The 5D5600.01 option to work with special 120 MB diskettes is not a built-in feature of BIOS and must be supported by the operating system. If an LS120 drive is operated without a second disk drive (in BIOS "Floppy A = None" and "Floppy B = None", then it can be accessed as the A 5D5600.01 drive and therefore can also be booted. If another disk drive is being used (parallel to the LS120 drive) in addition to the external disk drive interface, then the disk drive is operated as drive A and the LS120 drive is operated as drive B. In this case, the 5D5600.01 expression "LS/Zip" must be first in the "Boot Sequence" parameter so that the LS120 drive can be used for booting.
Specifications:
The table below describes the parameters of the 5D5600.01 Provit 5600 Membrane Keypad Switch.
| Part Number : | 5D5600.01 |
| Product Line: | Provit 5600 |
| Screen diagonal | 10.4 in |
| Warranty: | 365 Days Warranty |
| Input Power | 24 VDC |
| Display Type: | TFT color |
| Mounting position: | Vertical |
| Input Type: | Keypad |
| Serial interface Type: | RS232 |
| Storage | -20 to 50°C |
Related Provit Series Part No. :
| B&R Provit | Description | Inventory status |
| 5D5200.01 | B&R Provit 5200 Touch Screen Protective Film | In Stock |
| 5D520001 | Provit 5200 B and R Touch Digitizer Glass | Available Now |
| 5D5201.02 | B&R Provit 5200 HMI Touch Glass Repair | In Stock |
| 5D5210.01 | Provit 5200 B and R HMI Touch Digitizer Glass | Available Now |
| 5D5211.02 | Provit 5200 B and R Touch Screen Monitor | In Stock |
| 5D5500.10 | B&R Provit 5500 Membrane Keyboard | In Stock |
| 5D5500.32 | B&R Provit 5500 HMI Membrane Keypad Repair | In Stock |
| 5D5501.01 | B and R Provit 5500 Membrane Keyboard Keypad | Available Now |
| 5D5510.10 | B&R Provit 5500 Membrane Switch Repair | Available Now |
| 5D5600.01 | Provit 5600 B&R Keyboard Membrane Replacement | In Stock |
| 5D5600.02 | B and R Provit 5600 Terminal Keypad Touch Membrane | In Stock |
| 5D5600.03 | Provit 5600 B and R Keypad Membrane Touch Panel | Available Now |
| 5D5201.03 | B&R Provit 5200 Touch Screen Panel Repair | In Stock |
| 5D5211.03 | Provit 5200 B and R Touch Screen Glass | In Stock |
| B and R Provit | Description | Inventory status |
FAQ:
Question:How to replace the B&R Provit 5600 5D5600.01 processor fan?
Answer: 
1) Disconnect the power supply.
2) Touch the housing or ground connection (not the power supply!) in order to discharge any electrostatic charge from your body.
3) Open the device.
4) Loosen screws and unplug the fan's power supply. Remove fan.
5) Set the replacement fan on the heat sink at a slight angle (see image). Place the screws in the specified order and (using a Phillips head screwdriver) tighten as shown in the following image (1, 2, 3). Use three of the screws from the previously removed fan. Connect the fan's power supply.
6) Close the device.
7) Connect the lines to the power supply.
8) There are then two ways to check if the fan is working properly.
Question: What is the B&R Provit 5600 5D5600.01 Membrane Keypad Switch price?
Answer: Submit a fast quote, send VICPAS an email for best price.
Common misspellings:
5D560.01
5D5600.0
5D6500.01
5D5600.0l
5D56600.01
