DTAM Plus 2707-V40P2 Membrane Keypad Switch Repair
DTAM Plus 2707-V40P2 Membrane Keypad Switch Repair
DTAM Plus 2707-V40P2 Membrane Keypad Switch Repair
Model
2707-V40P2

Item specifics

Warranty
180 Days
Brand
Rockwell Automation Allen Bradley
Product Line
DTAM Plus
Supply
DTAM Plus Terminals Keypad Switch
model
2707-V40P2
Parts
Membrane Keypad Repair LCD Screen

Review

Description

2707-V40P2 DTAM Plus Terminals Membrane Keypad Keyboard and LCD Display Screen Repair Replacement


2707-V40P2 DTAM Plus Terminals Membrane Keyboard and LCD Display Screen Repair Replacement


The DTAM Plus accepts supply voltages in the following ranges depending upon the power supply designation.
• Versions with P1 power supply, accept 15-23V AC (47 to 440 Hz) or 20-30V DC
• Series D versions with P1 power supply only, accepts 20-30V DC
• Versions with P2 power supply, accept 85-265V AC (47 to 440 Hz) or110-300V DC


Other than the tools required to make the panel cutout, the tools required for installation are:
• 7mm (M4) deep well socket wrench or nut driver
• small slotted screwdriver
• torque wrench (in. / lbs).
The terminal is tightened against the panel with six self-locking nuts.


The DTAM Plus 2707-V40P2 supports four operating systems.
• Remote I/O
• PLC5-DF1
• AB BASIC
• AB DH-485 protocol
The type of operating system supported by the DTAM Plus depends upon its communication configuration


The DTAM 2707-V40P2 Programming Software (DPS) is a self-prompting, menu driven package that allows you to create and edit applications for the DTAM Plus or DTAM Micro operator terminals. DPS does not require any programming knowledge.



  Contact Best Price  


Specifications:

The table below describes the parameters of the DTAM Plus 2707-V40P2 terminals Parts.

Part Number : 2707-V40P2
Software FactoryTalk
Display ColorAmber
Warranty: 180 days Warranty
Product Line:DTAM Plus
Input Type:Keypad
Mounting position: vertical
Communication: Ethernet and RS-232
Communication:ControlNet


Related Allen Bradley DTAM Plus Terminals Part No. :

DTAM Plus HMI Description Inventory status
2707-V40P1 DTAM Plus Membrane Keypad Keyboard Repair Kit In Stock
2707-V40P1R Rockwell DTAM Plus Terminals Membrane Keyboard Replacement Available Now
2707-V40P2 Allen Bradley DTAM Plus Membrane Keypad Repair In Stock
2707-V40P2D DTAM Plus Allen Bradley Keypad Repalcement Available Now
2707-V40P2N DTAM Plus Membrane Switch Replacement Kit Available Now
2707-V40P2NR AB DTAM Plus Operator Panel Keypad Repair In Stock
2707-V40P2R DTAM Plus Membrane Keypad Switch Repair Kit Available Now
AB DTAM Plus Description Inventory status

Allen Bradley DTAM Plus Manuals PDF Download:

  • DTAM Plus 2707-V40P2 Operator Interface Module Installation Instructions
  • DTAM Programming Software Programming Manual
  • Allen Bradley DTAM Plus 2707-V40P2 Technical Data
  • DTAM Plus 2707-V40P2 Getting Started User Manual

  • FAQ:

    Question: How to use the 2707-V40P2 keyboard test to verify that the keyboard is functioning properly?

    Answer:To perform the 2707-V40P2 keyboard test:
    1. Use the [NEXT] or [PREV] keys to display Keyboard on the test selection screen.
    How to use the 2707-V40P2 keyboard test to verify that the keyboard is functioning properly?
    2. Press [←] to initiate the test. The DTAM Plus prompts you to press each key in a sequential order.The DTAM Plus prompts you to press each key in a sequential order.
    How to use the 2707-V40P2 keyboard test to verify that the keyboard is functioning properly?
    3. Press the keys as prompted form left to right beginning at the top.
    You must press all of the keys in the order prompted. If you press the wrong key, you must start over with the first key.
    How to use the 2707-V40P2 keyboard test to verify that the keyboard is functioning properly?
    4. Pressing the last key in the sequence terminates the keyboard test.
    The next test selection screen is displayed.
    How to use the 2707-V40P2 keyboard test to verify that the keyboard is functioning properly?
    5. To terminate the test function, press the [NEXT] or [PREV] keys to display Reset DUT in the test selection area. Press [←] to reset the DTAM Plus.


    Question: What is the 2707-V40P2 DTAM Plus HMI parts price?

    Answer: Submit a fast quote, send VICPAS an email for best price.


    Question: How to insert the DATM Plus 2707-V40P2 time or date?

    Answer:
    1. Use the arrow keys to position the cursor where you want to insert the date or time.
    2. Press [F5] to insert the time or [F6] to insert the date.
    The current date or time is inserted on the display:
    How to insert the DATM Plus 2707-V40P2 time or date?
    3. Continue programming the remainder of the screen.


    Common misspellings: 

    207-V40P2
    2707-V04P2
    2707-V4P02
    2707--V40P2
    2707-40P2
    2707V40P2
    2707-V40P22