E499047 SCN-AT-FLW10.1-Z01-0H1-R Touch Screen Replacement
E499047 SCN-AT-FLW10.1-Z01-0H1-R Touch Screen Replacement
E499047 SCN-AT-FLW10.1-Z01-0H1-R Touch Screen Replacement
E499047 SCN-AT-FLW10.1-Z01-0H1-R Touch Screen Replacement
E499047 SCN-AT-FLW10.1-Z01-0H1-R Touch Screen Replacement
E499047 SCN-AT-FLW10.1-Z01-0H1-R Touch Screen Replacement
Model
E499047 SCN-AT-FLW10.1-Z01-0H1-R

Item specifics

LCD Type
TFT
Warranty
365 Days
Shipping
DHL/FedEx/UPS/TNT/EMS/Aramex /DPEX
Supply Parts
Touch Screen Display
Environment
Free From Corrosive Gases
Size
10.1''

Review

Description

E499047 SCN-AT-FLW10.1-Z01-0H1-R HMI Touch Glass Replacement


E499047 SCN-AT-FLW10.1-Z01-0H1-R Touch Screen Glass Repair

You can clean E499047 SCN-AT-FLW10.1-Z01-0H1-R HMI Touch Glass of the device during operation. In order to avoid inadvertent touch entries when doing this, you must first set the device to "Cleaning Mode" with the help of the Display Control Tool. Also make sure that you not only clean the display area, but also the edge of E499047 SCN-AT-FLW10.1-Z01-0H1-R Touch Screen Monitor. Impurities in the edge area or liquids that do not run down the glass pane as drops but as a long short-circuit bridge create an electrically conductive connection between E499047 SCN-AT-FLW10.1-Z01-0H1-R Touchscreen area and the metal housing of the device. This unintentionally triggers a touch event at the edge of the touch screen, which can lead to incorrect operation.


The Display Control Tool does not start automatically when the device starts up. Proceed as follows to activate the "Cleaning Mode" of E499047 SCN-AT-FLW10.1-Z01-0H1-R Touch Digitizer Glass:


1. Click the Display Control Tool icon to start it. When the tool is started, a small sun symbol appears in the taskbar.
2. Right-click the sun symbol.
3. Select the "Cleaning Mode". "Cleaning Mode" is activated. You can now clean the front panel.
4. You can set the duration for which the device should remain in "Cleaning Mode". The period can be set between 5 and 120 seconds. Right-click the sun symbol again and click "Options". Now select the appropriate duration.




Specifications:

The table below describes the parameters of E499047 SCN-AT-FLW10.1-Z01-0H1-R Touch Screen Display.

Brand: Vicpas
Size: 10.1''
Shipping Time: 3-5 Days
Cooling Method: Natural Air Cooling
Operating Temperature: 0 °C ... +55 °C
Environment: Free From Corrosive Gases
Warranty: 365 Days
Storage Temperature: -25 °C ... +65 °C
Relative Humidity: 95%
LCD Type: TFT


Beckhoff CP68XX CP69XX Manuals PDF Download:

  • CP68XX.pdf
  • Built-in Control Panel CP68XX.pdf
  • CP69XX.pdf
  • CP69XX Control Panel Manual.pdf

  • FAQ:

    Question: What should I pay attention to when installing E499047 SCN-AT-FLW10.1-Z01-0H1-R Touch Screen Glass?

    Answer:
    • Position the Panel PC in such a way that reflections on the screen are avoided as far as possible.
    • Use the position of the screen as a guide for the correct installation height; it should be optimally visible for the user at all times.
    • The Panel PC should not be exposed to direct sunlight.
    • When the unit is in its mounting position, the ventilation openings must not be obstructed.
    • Extreme environmental conditions should be avoided as far as possible. Protect the Panel PC from dust, moisture and heat.
    • The ventilation slots of the Panel PC must not be covered.


    Question: How can I protect E499047 SCN-AT-FLW10.1-Z01-0H1-R Touch Panel?

    Answer:
    1. Use the touchscreen only with bare hands or while wearing appropriate gloves.
    2. When wearing gloves, ensure they are free of hard particles such as metal shavings, glass splinters, or similar debris.
    3. You can purchase a matching-size protective film from VICPAS to safeguard your touchscreen against dirt and scratches.


    Common misspellings: 

    E4990474 SCN-AT-FLW10.1-Z01-0H1-R
    E499047 SCN-AT-FLW101-Z01-0H1-R
    E499047 SCN-AT-FLW10.1-Z01-0H0-R
    E49947 SCN-AT-FLW10.1-Z01-0H1-R
    E499047 SCN-AT-FLW10.1-Z01-0H1R