EZ-T10C-FSM ETouch Screen Panel Z-T10C-FSM
EZ-T10C-FSM ETouch Screen Panel Z-T10C-FSM
EZ-T10C-FSM ETouch Screen Panel Z-T10C-FSM
EZ-T10C-FSM ETouch Screen Panel Z-T10C-FSM
EZ-T10C-FSM ETouch Screen Panel Z-T10C-FSM
EZ-T10C-FSM ETouch Screen Panel Z-T10C-FSM
Model
EZ-T10C-FSM

Item specifics

Touch screen tapes
Resistance touch screen
Size
10.4 inch
Warranty
365 Days
Brand
EZAutomation
Product Line
EZTouch HMIs EZTouch Original Series
Supply
EZ-T10C-FSM Touch Digitizer Glass Front Overlay
Shipping
2-4 workdays
Part Number
EZ-T10C-FSM

Review

Description

EZAutomation EZTouch Original EZ-T10C-FSM Protective Film HMI Panel Glass Replacement

Order each part separately is available

EZAutomation EZTouch Original EZ-T10C-FSM Front Overlay Touch Screen Repair Replacement

EZ-T10C-FSM Touch Panel Protective Film EZTouch Innovative Unique Features
• Patented EZ-T10C-FSM Front Overlay Touch Digitizer Glass HMI on-line edit, No downtime
• Only HMI that can still talk to AB’s DH+/RIO, DeviceNet, MB+, Siemens with Profibus and Mitsubishi with CCLink
• Best looking objects and animation.
• EZ-T10C-FSM Touch Screen Monitor Front Overlay HMI On-Screen Recipe Edit.
• Remote Monitoring and Control, Smart phones & Ethernet.
• Communicate to all PLCs, including DH+/RIO.
• Dual PLC Drivers with automatic tag conversion.
• Mfr. cost reduction & IP protection for qualified customers.
• Most Rugged 0.090” thick anti-glare touch screen.
• Fastest touch response time of any HMI.
• Unique Visibility tag for best screen space utilization.
• Unicode for multiple languages.
• Easiest Programming Software, design time in hrs not days.
• Full Project simulation on your PC. Custom start-up screen.
• “C level” scripting and logic expressions.
• Most advanced Alarm management and logging.
• Pass-through programming for all PLCs.




Specifications:

The table below describes the parameters of the EZAutomation EZ-T10C-FSM Protective Film Touch Digitizer HMI Parts.

Brand: EZAutomation
Brightness/Life: 400 nits/75,000 hours
Enclosure: NEMA 4, 4X (indoor)
Product Line: EZTouch Original
Touch Size: 10"
Display Colors: 128-color palette
Display Type: TFT Color
Power supply: 24 V DC
Resolution: 800 x 600 pixels
Warranty: 12-Month Warranty


Related EZAutomation EZTouch HMIs Series Part No. :

EZTouch HMI Description Inventory status
EZ-T10C-FSD EZTouch HMI Front Overlay Touch Membrane Replacement In Stock
EZ-T10C-FSE EZAutomation EZTouch HMI Series Touch Glass Front Overlay Repair In Stock
EZ-T10C-FSH EZAutomation EZTouch HMI Series Touch Digitizer Glass Overlay Repair Available Now
EZ-T10C-FSM EZTouch HMI Panel Glass Protective Film Repair Replacement Available Now
EZ-T10C-FSP EZ Automation EZTouch HMI Series Touch Screen Monitor Front Overlay In Stock
EZ-T10C-FST EZAutomation EZTouch HMI Series Front Overlay MMI Touch Screen Repair In Stock
EZ-T10C-FSU EZAutomation EZTouch HMI Series HMI Touch Screen Protective Film Available Now
EZ-T10C-FT EZAutomation EZTouch HMI Series Protective Film Touchscreen Repair In Stock
EZ-T10C-FU EZAutomation EZTouch HMI Series HMI Protective Film Touch Screen Glass Available Now
EZ-T10C-RMC EZAutomation EZTouch HMI Series Front Overlay Touch Screen Panel Repair In Stock
EZTouch HMI Description Inventory status


EZAutomation EZTouch HMIs Series HMI Manuals PDF Download:

  • EZSeries TouchPanel Hardware Manual
  • EZSeries TouchPanel Programming Software Manual
  • EZTouch-Original-datasheets
  • EZTouch-Original-specs
  • EZ-Sunlight-Readable-datasheet
  • EZ-Sunlight-Readable-spec
  • EZW-datasheets
  • EZW-specs

  • FAQ:

    Problem: Memory Card

    Action: Make sure that the Flash Card is in top slot, and the RAM Card is in the bottom slot.


    Problem: EZ-T10C-FSM Display Blank

    Action:
    1. EZ-T10C-FSM Display indicates “NO POWER UP SCREEN” If this message is displayed the panel battery needs to be replaced.
    2. Display is blank. Push extreme upper left and extreme lower left touch cells on the front of the EZ-T10C-FSM panel (top and bottom of column 1 on panel.)
    a. There is no change, the display remains blank. Indicates UNIT FAILURE, return for service.
    b. Unit SETUP screen appears, screen is hard to read. Adjust screen contrast control for 6- or 8-inch units (10-inch and 15-inch units have no contrast adjustment).
    c. Unit SETUP screen appears normal. The EZ-T10C-FSM Touchscreen Protective Film HMI unit has no user program — install the user program.


    Problem: EZ-T10C-FSM Display hangs when the unit is powered up, “Initializing...” message remains on screen (unit has invalid RAM memory)

    Action:
    1. Remove power. While pressing extreme upper and lower left touch cells on the panel, reapply power.
    2. You will now be in setup mode, press exit to enter run mode. The EZ-T10C-FSM screen will be blank.
    3. Run EZ Series EZ-T10C-FSM Touch Panel Editor Programming Software. Select Panel > Clear Memory from main menu bar, or upload a new user program to the panel.

    Common misspellings: 

    EZ-T10C-FM
    EZ-10C-FSM
    EZ-T10-FCSM
    EZ-T1oC-FSM
    EZ--T10C-FSM