Control Techniques SPMA1422 HMI Case Repair
- Model
- SPMA1422
Item specifics
- Brand
- VICPAS
- Warranty
- 365 Days
- Product Line
- Control Techniques Unidrive SPM
- Shipping Time
- 3-5 Days
- Supply Parts
- Plastic Case
Review
Description
Control Techniques Unidrive SPM SPMA1422 Plastic Shell Repair
Order each part separately is available
Industrial HMIs live in punishing conditions—vibration, temperature swings, dust, moisture, and accidental impacts. Over time, even a well-maintained Control Techniques Unidrive SPM SPMA1422 Plastic Shell develops cracks, warping, or weakened seals that invite contamination and shorten internal component life.
VICPAS replacement Nidec Unidrive SPM SPMA1422 HMI Case for Control Techniques are engineered with this environment in mind. The enclosures use impact-grade polymer that resists cracking under stress and maintains dimensional stability across a wide temperature range. This isn't a thin cosmetic cover—it's a structural housing built to match the original equipment's protective role.
Beyond durability, the design of Unidrive SPM SPMA1422 Plastic Case restores the clean, professional look of your HMI station. Faded, scratched, or yellowed housings get replaced with fresh, uniform enclosures that improve operator focus and equipment confidence.
The swap takes minutes and requires zero disassembly of internal electronics. Your existing HMI module slides in, the cover snaps or screws into place, and the station returns to service with renewed structural integrity.
Protect the investment you've already made. A VICPAS case keeps your Control Techniques HMI running in tough conditions without forcing a full upgrade.
Specifications:
The table below describes the parameters of Control Techniques Unidrive SPM SPMA1422 HMI Case.
| Model Number: | SPMA1422 |
| Cooling Method: | Forced Convection |
| Warranty: | 365 Days |
| Humidity: | 95% |
| Product Line: | Unidrive SPM |
| Environment: | Free From Corrosive Gases |
| Storage Temperature: | -40º to 55ºC (-40º to 131ºF) |
| Ambient Temperature: | 0º to 40ºC (32º to 104ºF) |
| Material: | ABS Plastic |
| Brand: | VICPAS |
Related Control Techniques Unidrive SPM Part No. :
| Control Techniques | Description | Inventory status |
| Unidrive SPM | Description | Inventory status |
Control Techniques Unidrive SPM HMI Manuals PDF Download:
FAQ:
Question: Do you offer custom colors or logo printing on the housing?
Answer: Yes, we can accommodate custom color matching and logo/label recess molding for bulk orders. Minimum order quantities may apply for custom runs. Contact us with your specifications for a quote.
Question: How do I distinguish between different Unidrive SPM SPMA1422 HMI shell versions if mine looks slightly different from the listing photo?
Answer: Check the model number and production code on the label of your existing HMI. If there have been hardware revisions over the years, the shell design may have minor variations. Send us a photo of your current housing and its label — we can match it to the correct version.
Question: What if my HMI model isn't listed on your site?
Answer: Contact us with your HMI model number and a photo of the damaged housing. We may still be able to produce a matching enclosure, especially if the design is similar to an existing mold. If we cannot support your model, we will tell you honestly rather than selling something that doesn't fit.
Common misspellings:
SPMA422
SPMA14122
SPA1422
SPMAA1422
SPMA14202
One set:
3871-0063-05 Middle Cover
3871-0067-01 Grey Badge
3871-0068-01 Green Badge
3871-0066-04 Molding Center
3871-0075-04 Top Terminal Cover
3871-0115-02 Bottom Terminal Cover
3871-0000-09 Control Assembly
3871-0001-08 DC Bus Cover
3871-0008-01 Serial Port Cover
3871-0004-01 Terminal Gland Plate
3871-0034-03 Terminal Cover
3871-0127-00 Terminal Cover Overlay
