CP3721-1600-0030 CP3921-0000 CP3921-0010 CP3921-1500-0010 Touch Panel Replacement
- Model
- CP3721-1600-0030 CP3921-0000 CP3921-0010 CP3921-1500-0010
Item specifics
- Product Line
- CP2XXX CP3XXX
- LCD Type
- TFT
- Shipping Time
- 3-5 Days
- Supply Parts
- Touch Screen Monitor
- Environment
- Free From Corrosive Gases
- Size
- 21.5''
Review
Description
Beckhoff CP3721-1600-0030 CP3921-0000 CP3921-0010 CP3921-1500-0010 HMI Touch Glass Replacement
Order each part separately is available

You can clean CP3721-1600-0030 CP3921-0000 CP3921-0010 CP3921-1500-0010 HMI Touch Glass of the device during operation. In order to avoid inadvertent touch entries when doing this, you must first set the device to "Cleaning Mode" with the help of the Beckhoff Display Control Tool. Also make sure that you not only clean the display area, but also the edge of the CP3721-1600-0030 CP3921-0000 CP3921-0010 CP3921-1500-0010 Touch Screen Monitor. Impurities in the edge area or liquids that do not run down the glass pane as drops but as a long short-circuit bridge create an electrically conductive connection between Beckhoff HMI CP3721-1600-0030 CP3921-0000 CP3921-0010 CP3921-1500-0010 Touchscreen area and the metal housing of the device. This unintentionally triggers a touch event at the edge of the touch screen, which can lead to incorrect operation.
The Beckhoff Display Control Tool does not start automatically when the device starts up. Proceed as follows to activate the "Cleaning Mode" of Beckhoff Touch Screen CP3721-1600-0030 CP3921-0000 CP3921-0010 CP3921-1500-0010 Touch Digitizer Glass:
1. Click the Beckhoff Display Control Tool icon to start it. When the tool is started, a small sun symbol appears in the taskbar.
2. Right-click the sun symbol.
3. Select the "Cleaning Mode". "Cleaning Mode" is activated. You can now clean the front panel.
4. You can set the duration for which the device should remain in "Cleaning Mode". The period can be set between 5 and 120 seconds. Right-click the sun symbol again and click "Options". Now select the appropriate duration.
Specifications:
The table below describes the parameters of Beckhoff CP3721-1600-0030 CP3921-0000 CP3921-0010 CP3921-1500-0010 Touch Screen Display.
Brand: | Vicpas |
Size: | 21.5'' |
Product Line: | CP2XXX CP3XXX |
Cooling Method: | Natural Air Cooling |
Operating Temperature: | 0 °C ... +55 °C |
Environment: | Free From Corrosive Gases |
Warranty: | 365 Days |
Storage Temperature: | -25 °C ... +65 °C |
Relative Humidity: | 95% |
LCD Type: | TFT |
Related Beckhoff Part No. :
Beckhoff | Description | Inventory status |
Beckhoff | Description | Inventory status |
Beckhoff CP2XXX CP3XXX Manuals PDF Download:
FAQ:
Question: What should I pay attention to during disassemble and dispose Beckhoff CP3721-1600-0030 CP3921-0000 CP3921-0010 CP3921-1500-0010?
Answer: You must first have disconnected the power supply and the cables. If the panel PC is suspended from the ceiling and you undo the cap nut of the mounting arm adapter without securing it, the panel PC will fall down. Make sure the panel PC is secured against falling down before you undo the slotted nut of the mounting arm adapter.
Question: How can I protect CP3721-1600-0030 CP3921-0000 CP3921-0010 CP3921-1500-0010 Touch Panel?
1. Use the touchscreen only with bare hands or while wearing appropriate gloves.
2. When wearing gloves, ensure they are free of hard particles such as metal shavings, glass splinters, or similar debris.
3. You can purchase a matching-size protective film from VICPAS to safeguard your touchscreen against dirt and scratches.
Common misspellings:
CP3721-1200-0030CP3721-1600-0010
CP371-1600-0030
CP3921-0001
CP39221-0000
CP3921-1000
CP39210010
CP3921-00010
CP3921-000
CP3922-1500-0010
CP3921-1500-0050
CP3921-100-0010