5D5212.03 Provit 5200 HMI Panel Glass Membrane Keyboard
- Model
- 5D5212.03
Item specifics
- Brand
- B&R
- Warranty
- 1 Year VICPAS Warranty
- Model
- B&R Provit 5200 5D5212.03
- Shipping
- DHL/FedEx/UPS/TNT/EMS/Aramex /DPEX
Review
Description
B&R Provit 5200 5D5212.03 Operator Panel Keypad HMI Touch Screen Replacement
Order each part separately is available
The B&R Provit 5200 5D5212.03 lithium battery (3 V, 950 mAh) keeps the CMOS memory and real-time clock running when the supply voltage for the B&R Provit 5200 5D5212-20 IPC has been switched off. The buffer duration of the battery is at least 4 years (at 50°C, 8.5 mA current requirements of the supplied components and a self-discharge of 40%). The B&R Provit 5200 5D5212.03 reset button is accessible through a small hole near the external floppy disk drive interface. In order to avoid accidental activation, a B&R Provit 5200 5D5212.03 reset can only be triggered with a pointed object.
The B&R Provit 5200 5D5212-20 MTC is responsible for the following tasks and components:
• AT PS/2 keyboard
• Panelware keypad modules
• Acquisition of operating data (controller and display unit)
• Temperature monitoring with fan regulation
• Qualitative evaluation of the condition of the battery (good/bad)
Specifications:
The table below describes the parameters of the 5D5212.03 Provit 5200 Touch Screen Monitor Membrane Keypad Switch.
| Part Number: | 5D5212.03 |
| Product Line: | Provit 5200 |
| Warranty: | 365 Days Warranty |
| Input Power: | 24 VDC |
| Display Type: | TFT color |
| Mounting Position: | Vertical |
| Input Type: | Keypad/Touch |
| Serial Interface Type: | RS232 |
Related B&R HMI Series Part No. :
| B&R HMI Repair | Description | Inventory status |
| 4PP420.0571-25 | Power Panel 400 Touch Screen Glass Protective Film Replacement | In Stock |
| 5D5202.04 REV F5 | Provit 5200 B and R Touch Panel Glass LCD Display Screen Repair | Available Now |
| 5D5202.05 Rev I0 | B&R Provit 5200 Touch Screen Panel Repair Replacement | In Stock |
| 5D5212.02 Rev.G0 | B and R Provit 5200 Front Overlay Touch Digitizer Replacement | In Stock |
| 5D5212.03 | Provit 5200 B&R HMI Touch Screen Organizer Membrane Keyboard | In Stock |
| 5D5212.09 Rev.I0 | B and R Provit 5200 Touch Panel Glass Repair Replacement | Available Now |
| 5D5500.19 | Provit 5500 B&R Membrane Keypad Switch Replacement | Available Now |
| 5P80:VANAD-02 | Automation Panel 800 B&R Touch Membrane Repair | In Stock |
| 5PC8:240187.017-01 | B and R Panel PC 800 Front Overlay Touch Digitizer Glass | Available Now |
| 5PC8:444398.022-00 | Panel PC 800 B&R HMI Touch Screen Organizer Replacement Repair | In Stock |
| B and R Replacement | Description | Inventory status |
FAQ:
Question: How to change the B&R Provit 5200 5D5212.03 Battery?
Answer:
1. Disconnect the power supply
2. Touch the housing or ground connection (not the power supply!) in order to discharge any electrostatic charge from your body.
3. Remove the battery compartment cover.
4. Remove the battery by pulling the removal strip (do not use - pliers or uninsulated tools! --> risk of short circuiting).
5. The battery should not be held by its ends. Insulated tweezers may also be used for removing the battery.
6. Insert the new battery with correct polarity. The removal strip should be protruding from the battery holder and the "+" side of the battery should be facing downward. To be able to remove the battery again, the removal strip must protrude from the upper side of the battery.
7. Now wrap the end of the removal strip over the top of the battery and insert it underneath the battery so that it does not protrude from the battery holder.
8. Replace cover.
9. Reconnect the power supply.
10. Set the date and time
Question: What is the B&R Provit 5200 5D5212.03 Membrane Keypad Switch price?
Answer: Submit a fast quote, send VICPAS an email for best price.
Common misspellings:
5D5212.0
5D512.03
5D521.203
5D5212.o3
5D52112.03
