Titrator Compact C20 C30 Protective Film Touch Screen
- Model
- Mettler Toledo C20 C30
Item specifics
- Brand
- Mettler Toledo
- Warranty
- 365 Days
- Supply
- Mettler Toledo C20 C30 HMI Front Overlay
- Supply
- Mettler Toledo C20 C30 HMI Touch Screen Glass
- Shipping
- 2-4 workdays
Review
Description
Mettler-Toledo Compact Karl Fischer Coulometer C20 C30 Front Overlay Touch Screen Panel HMI Repair
Order each part separately is available
The C20 C30 Touch Screen Tablet Front Overlay Routine Karl Fischer Coulometer simplifies water content analysis while delivering fast and precise results. It is suitable for analyzing samples from various industries, with water content levels between 1 ppm and 5%, either through single measurements or in batch series with statistical evaluations.
Solvent Manager
Users are protected against contact with chemicals using the Solvent Manager liquid handling device. The C20 C30 Touch Membrane Front Overlay titrator fully controls it and offers the possibility of removing the reagents with minimal user interaction.
Diaphragmless cell
The user can choose a current generator cell with or without a diaphragm. For most samples, the cell without diaphragm offers more convenience, as no catholyte is needed. Due to its unique design, the diaphragmless cell even suits the demands of very precise low water content determinations.
Reagent Control
The titration cell is always in good condition, as Reagent Control monitors three different parameters and replaces the reagent when necessary in One Click. The Solvent Manager also empties, fills, or replaces the reagent whenever required and keeps the user fully protected.
VICPAS supplies Mettler Toledo C20 C30 Touch Screen Display and Protective Film with 365 days warranty and supports Urgent Worldwide Shipping.
Specifications:
The table below describes the parameters of the Mettler-Toledo Compact Karl Fischer Coulometer C20 C30 Protective Film Touch Glass HMI Parts.
| Overvoltage Category: | II |
| Part Number: | C20 C30 |
| Measurement Range: | 1 ppm – 5 % |
| Warranty: | 365 Days |
| Brand: | Mettler Toledo |
| Type: | Touchscreen |
| Data Export: | RS-232 |
| Ambient Temperature: | 5 °C – 40 °C |
Related Mettler Toledo HMI Part No. :
| METTLER TOLEDO Scale | Description | Inventory status |
| Mettler-Toledo Terminal | Description | Inventory status |
Mettler Toledo HMI Manuals PDF Download:
FAQ:
Question: What should I do if the drift value is unusually high?
Answer:
If the drift value is unusually high, follow these steps:
· Ensure the titration vessel is properly sealed to prevent external moisture from affecting the system.
· Verify that the desiccant in the drying tubes is not saturated; replace it if necessary.
· Check for cracks or leaks in the glassware and tubing connections.
· Clean and dry the titration vessel thoroughly before starting a new measurement.
Question: How do I export data from the C20 C30 touch digitizer glass front overlay titrators?
Answer:
You can export data easily via the following methods:
· Use a USB drive to transfer results directly from the device.
· Connect the titrator to a PC via Ethernet or RS232 to transfer data for further analysis or storage.
· For advanced connectivity, you can integrate the titrator with the LabX software for comprehensive data management.
Common misspellings:
C22 C30C20 C330
CZ0 C30
C20 C3
C20 C3o
