Mettler-Toledo Hi-Speed 30260267 Touch Glass Front Film

Order each part separately is available

Mettler Toledo Hi-Speed 30260267 MMI Touch Screen Front Overlay scale optimal location will ensure accurate and reliable operation of the balance. The METTLER TOLEDO Hi-Speed 30260267 HMI Front Film Touch Screen Terminal surface must be able to safely take the weight of the balance when fully loaded. The following local conditions must be observed:

Important
If the balance is not horizontal at the outset, it must be leveled during commissioning.
• Operate the balance only indoors and at an altitude of less than 4000 m above sea level.
• Before switching on the balance, allow all its parts to reach room temperature (+5 to 40 °C). Make sure that the relative humidity is between 10% and 80% and that non-condensing conditions are met.
• The Mettler-Toledo Hi-Speed 30260267 Touch Digitizer Protective Film scale power plug must be easily accessible.
• Firm, horizontal location as free from vibrations as possible.
• Avoid direct sunlight.
• No excessive temperature fluctuations.
• No powerful drafts.
• Surroundings as free from dust as possible.