HMI520M HMI 520M-001 HMI 520M-002 Touch Digitizer Protective Film
- Model
- HMI520M HMI 520M-001 HMI 520M-002
Item specifics
- Warranty
- 365 Days
- Shipping
- 2-4 workdays
- Brand
- Weinview
- Supply Parts
- Front Overlay Touchscreen
- Size
- 5.7''
- Touch Type
- Resistive
Review
Description
Weinview HMI520M HMI 520M-001 HMI 520M-002 Front Overlay Touchscreen Replacement
Order each part separately is available
Precautions
Please observe the following precautions when installing the Weintek Weinview HMI. Failure to comply with these restrictions could result in loss of life, serious personal injury, or HMI520M HMI 520M-001 HMI 520M-002 Touch Screen Monitor Protective Film damage.
1. Do not operate the device in areas subject to explosion due to flammable gases, vapors, or dusts. It will also do harm to HMI520M HMI 520M-001 HMI 520M-002 Touchscreen Front Overlay.
2. Do not connect the unit to an AC power source. You will cause permanent damage to it.
3. Do not attempt to use a DC power supply that does not meet the power requirements. You may cause malfunction or permanent damage.
4. Do not power the HMC with a DC power supply used for inductive loads or for input circuitry to the programmable logic controller. Severe voltage spikes caused by these devices may cause the damage to HMI520M HMI 520M-001 HMI 520M-002 Protective Film Touch Screen Tablet.
5. Care should be taken when locating Weinview HMI HMI520M HMI 520M-001 HMI 520M-002 Front Overlay MMI Panel Screen behind the device to ensure that AC power wiring, PLC output modules, contactors, starters, relay and any other source of electrical interference are located away from the unit. Particular care should be taken to locate variable speed drives and switching power supplies away from the device.
Specifications:
The table below describes the parameters of the Weinview HMI520M HMI 520M-001 HMI 520M-002 Touch Digitizer Front Overlay.
| Operating Temperature: | 0 ~ 45°C |
| Touch Size: | 5.6'' |
| Cooling Method: | Natural Air Cooling |
| Touch Type: | Resistive |
| Storage Temperature: | -20 ~ 60°C |
| Touch Accuracy: | 1.5 mm |
| Light Transmission: | Above 80% |
| Front Panel: | IP65 |
| Warranty: | 365 Days |
| Brand: | Weinview |
Related Weinview HMI No. :
| Weinview HMI | Description | Inventory status |
| HMI 5097 DXL | Weinview Touch Screen Front Overlay Replacement | In Stock |
| HMI 520C-002 HMI 520C-005E HMI520C-006E | Weinview Protective Film Touch Screen Monitor Repair | Available Now |
| HMI 520M-005 | Weinview Touch Digitizer Glass Front Overlay Replacement | In Stock |
| HMI504T | Weinview Protective Film Touch Screen Glass Repair | Available Now |
| HMI520C-006 | Weinview Front Overlay Touch Membrane Replacement | In Stock |
| HMI520M HMI 520M-001 HMI 520M-002 | Weinview Touch Screen Tablet Protective Film Repair | Available Now |
| HMI520M-006 HMI520T E HMI520T-007E | Weinview Touch Screen Monitor Front Overlay Replacement | In Stock |
| HMI520T HMI520T-007 HMI520C | Weinview Touch Screen Panel Protective Film Repair | Available Now |
| HMI530C-001 HMI530C-002 HMI 530C-004 HMI530C-005 | Weinview HMI Touch Glass Front Overlay Replacement | In Stock |
| HMI530T HMI530T-006 HMI530TE HMI530T-006E | Weinview MT4000E Series Protective Film Touch Screen Film Replacement | In Stock |
| HMI550H HMI550HE HMI550H-005E HMI550T HMI550T-005 | Weinview Touch Screen Display Front Overlay Repair | Available Now |
| HMI606T HMI 606T-001R HMI606T-001 HMI606C-001 | Weinview Front Overlay Touch Screen Glass Replacement | In Stock |
| HMI608T HMI608T-001 | Weinview Protective Film Touch Screen Tablet Repair | Available Now |
| HMI610X-CE HMI610X-XP | Weinview Touch Screen Monitor Front Overlay Replacement | In Stock |
| HMI612X-CE HMI612X-XP | Weinview Protective Film MMI Panel Screen Repair | Available Now |
| HMI615X-CE HMI615X-XP | Weinview Touch Membrane Front Overlay Replacement | In Stock |
| Weinview HMI | Description | Inventory status |
Weinview HMI Manuals PDF Download:
FAQ:
Question: How can I protect the Weinview HMI520M HMI 520M-001 HMI 520M-002 Touch Screen Film Front Overlay?
Answer:
• Avoid Direct Sunlight: Keep the touch screen out of prolonged exposure to direct sunlight, which can cause overheating and degrade the screen material over time.
• Moisture Protection: Ensure the device is stored in a dry environment. High humidity or condensation can lead to damage, including electrical short circuits and screen malfunction.
Question: What should I pay attention to during mounting the Weinview HMI520M HMI 520M-001 HMI 520M-002 Touch Screen Tablet Protective Film?
Answer:
1. Install the equipment in an environment free from excessive humidity, dust, or extreme temperatures, as these conditions can affect the device's reliability.
2. Provide sufficient ventilation around the device to prevent overheating. Ensure that airflow is not blocked by surrounding objects.
Common misspellings:
HMI5220M
HMI5520M
HMI502M
HMI 520M001
HMI 520M-000
HMI 521M-001
HMI 520-002
HMI 520M002
HMI 520M-020
