MT4400T MT4400TE MT4403T MT4403TE Protective Film Touch Digitizer

Order each part separately is available

Cautions

When you've assembled Weintek Weinview MT4400T MT4400TE MT4403T MT4403TE Touch Panel Protective Film, you may encounter the following problems.

About the touchscreen calibration, if you have trouble with it, press and hold anywhere on the screen when HMI starts until it enters touchscreen calibration mode. If the display does not come on within 5 seconds of power up, remove power. In addition, a resettable fuse will protect against overcurrent faults in DC circuit and the resetting will take place after a period of time. Check wiring for proper connections and try to power up again. The system designer should be aware that devices in Controller systems could fail and thereby create an unsafe condition, it will damage the MT4400T MT4400TE MT4403T MT4403TE Front Overlay Touch Membrane. Furthermore, electrical interference in an operator interface can lead to equipment start-up, which could result in property damage and/or physical injury to the operator.

Tips about cleaning HMI Weinview MT4000E Series MT4400T MT4400TE MT4403T MT4403TE Touch Screen Glass Front Overlay: disconnect the equipment from all power outlets before cleaning. Use only a damp cloth for cleaning. Do not use liquid or spray detergents. Never pour any liquid into an opening. This may cause fire or electric shock. After cleaning, you should keep MT4400T MT4400TE MT4403T MT4403TE Protective Film Touch Digitizer away from humidity.