ET100 KDT-3355 KDT-5753 KDT-6616 MMI Panel Screen Replacement
- Model
- ET100 KDT-3355 KDT-5753 KDT-6616
Item specifics
- Warranty
- 365 Days
- Shipping
- 2-4 workdays
- Brand
- Vicpas
- Light Transmission
- Above 80%
- Supply Parts
- Touch Digitizer Glass
- Size
- 10.1''
- Touch Type
- Resistive
Review
Description
ET100 KDT-3355 KDT-5753 KDT-6616 Touch Screen Glass Replacement
Installation Environment
Firstly, pay attention to the Electrical Environment during install ET100 KDT-3355 KDT-5753 KDT-6616 Touch Screen. The circuitry is designed to resist the effects of electrical noise. This does not guarantee noise immunity in severe cases. Proper wire routing and grounding will insure proper operation of ET100 KDT-3355 KDT-5753 KDT-6616 Touch Panel.
Secondly, environmental considerations should be noticed. Ensure ET100 KDT-3355 KDT-5753 KDT-6616 Touch Membrane are installed correctly and that the operating limits are adhered to. Avoid installing units in environments with severe mechanical vibrations or shocks. Do not operate the unit in areas with explosion hazards caused by flammable gases, vapors, or dust. It will damage ET100 KDT-3355 KDT-5753 KDT-6616 Touch Digitizer Glass. Additionally, the unit should not be installed where acid gases, such as sulfur dioxide (SO2), are present. ET100 KDT-3355 KDT-5753 KDT-6616 Touch Screen Monitor must be mounted in a vertical position and used on a flat surface enclosure, designed for Pollution Degree 2 environments and dry locations. It operates effectively in relative humidity ranging from 10% to 90% (non-condensing).
Be careful and use dry cloths to clean ET100 KDT-3355 KDT-5753 KDT-6616 Touch Screen Film. Do not use liquid or spray detergents for cleaning. Protection impairment if used in a manner not specified by the manufacturer.
Specifications:
The table below describes the parameters of the ET100 KDT-3355 KDT-5753 KDT-6616 Touch Panel.
| Brand: | Vicpas |
| Front Panel: | IP65 |
| Warranty: | 365 Days |
| Resolution: | 1024 x 600 Pixels |
| Touch Size: | 10.1'' |
| Environment: | Free From Corrosive Gases |
| Light Transmission: | Above 80% |
| Operating Temperature: | 0 ~ 45°C |
| Warranty: | 365 Days |
| Storage Temperature: | -10 ~ 60°C |
Weinview HMI Manuals PDF Download:
FAQ:
Question: How can I protect the ET100 KDT-3355 KDT-5753 KDT-6616 Touch Screen Panel?
Answer:
• Avoid Direct Sunlight: Keep the touch screen out of prolonged exposure to direct sunlight, which can cause overheating and degrade the screen material over time.
• Moisture Protection: Ensure the device is stored in a dry environment. High humidity or condensation can lead to damage, including electrical short circuits and screen malfunction.
• Physical Protection: Avoid placing heavy objects on the screen, as pressure can damage the it, leading to cracks or impairing touch sensitivity.
• Clean Properly: Use a soft, lint-free cloth for cleaning the touch screen. Do not use harsh chemicals or abrasive materials that could scratch or damage the it.
Question: What should I pay attention to during mounting the ET100 KDT-3355 KDT-5753 KDT-6616 Touch Screen Tablet?
Answer:
1. Install the equipment in an environment free from excessive humidity, dust, or extreme temperatures, as these conditions can affect the device's reliability.
2. Provide sufficient ventilation around the device to prevent overheating. Ensure that airflow is not blocked by surrounding objects.
Common misspellings:
ET101 KDT-3335 KDT-7553 KDT-61616
ETT100 KTD-3355 KDT-15753 KDT-1616
ET110 KDT-33455 KDT-5573 KDT6616
ET001 KDT3355 KDD-5753 KTT-6616
TE100 KDT-5533 KDT5753 KTD-6616
