MT8150XE Touch Membrane Protective Film Replacement
MT8150XE Touch Membrane Protective Film Replacement
MT8150XE Touch Membrane Protective Film Replacement
MT8150XE Touch Membrane Protective Film Replacement
MT8150XE Touch Membrane Protective Film Replacement
MT8150XE Touch Membrane Protective Film Replacement
Model
MT8150XE

Item specifics

Warranty
365 Days
Shipping
2-4 workdays
Brand
Weinview
Product Line
XE Series
Supply Parts
Front Overlay Touch Digitizer Glass
Size
15''
Touch Type
Resistive

Review

Description

Weinview XE Series MT8150XE Protective Film MMI Panel Screen Repair

Order each part separately is available

Weinview XE Series MT8150XE Front Overlay Touch Screen Glass Replacement

Environmental Considerations

Care should be taken when locating MT8150XE Touchscreen Front Overlay behind the unit to ensure that AC power wiring, PLC output modules, contactors, starters and relays, and any other source of electrical interference are located away from the back of the unit. Particular note should be taken to the position of variable speed drives and switching power supplies. Their input and load cables should be screened to a central star earth point.


Weinview touch screen MT8150XE Protective Film Touch Panel is designed for use in factory environments, capable of operating within temperatures ranging from 32 to 113 °F (0 to 45 °C), typical of most industrial settings. It may not be suitable for certain outdoor applications, so it is advised to consult the factory for recommendations on outdoor usage. There is a front bezel of the XE Series, ensuring that when properly installed in the panel, the panel's rating remains intact, preventing fluid entry during washdowns.

Do not operate HMI Weinview MT8150XE Protective Film Touch Screen Glass in areas with explosion hazards from flammable gases, vapors, or dust. Additionally, the unit should not be installed in locations with rapid temperature changes or high humidity, as this can cause condensation inside the device. Avoid environments with severe mechanical vibrations or shocks during installation because it will do harm to MT8150XE Front Overlay Touch Digitizer.




Specifications:

The table below describes the parameters of the Weinview XE Series MT8150XE Touch Screen Tablet Protective Film.

Warranty: 12 Months
Light Transmission: Above 80%
Brand: Weinview
Storage Temperature: -20 ~ 60 °C (-4 ~ 140 °F)
Touch Size: 15''
Operating Temperature: 0°~50°C (32°~122°F)
Relative Humidity: 10%~90%
Product Line: XE Series
Display Resolution: 1024 x 768 Pixels
Touch Panel: 4-Wire Resistive Type


Related Weinview HMI No. :

Weinview HMI Description Inventory status
MT8102iQ Weinview iE Series Touch Screen LCD Overlay Housing Replacement In Stock
MT8104i Weinview MT8000i Series Protective Film Touch Screen Repair Available Now
MT8104iH MT8104IH2WV MT8104X MT8104XH Weinview MT8000i Series Housing Touch Panel Front Overlay Replacement In Stock
MT8104T MT8104TWV Weinview iE Series Protective Film Touch Membrane HMI Case Repair Available Now
MT8106iP MT8106iQ Weinview iP Series Touchscreen HMI Case LCD Display Overlay Replacement In Stock
MT8121iE MT8121iE1WV MT8121iE2 MT8121iE2WV MT8121T Weinview iE Series Protective Film Touch Screen Monitor Repair Available Now
MT8121X MT8150X Weinview MT8000i Series Touch Screen Glass Front Overlay Replacement In Stock
MT8121XE Weinview XE Series MMI Panel Screen Protective Film Repair Available Now
MT8121XE2 Weinview XE Series Protective Film Touch Screen Display Replacement In Stock
MT8121X-V1WV MT8121TEV Weinview iE Series Touch Screen Tablet Front Overlay Repair Available Now
MT8150iE MT8150iE1 MT8150iE1WV Weinview iE Series Protective Film Touch Screen Panel Replacement In Stock
eMT8150iE2 MT8150iE2WV Weinview iE Series Front Overlay Touch Digitizer Glass Repair Available Now
MT8150XE Weinview XE Series Touch Panel Protective Film Replacement In Stock
Weinview HMI Description Inventory status

Weinview HMI Manuals PDF Download:

  • iE_XE MTV iP_series_brochure_Weintek.pdf
  • MT8090XE_Datasheet_ENG.pdf
  • MT8091XE_Datasheet.pdf
  • MT8092XE_Datasheet_ENG.pdf
  • MT8121XE_Datasheet_ENG.pdf
  • MT8150XE_Datasheet_ENG.pdf

  • FAQ:

    Question: Can I connect external devices to the XE Series HMI?

    Answer: Yes, the XE Series HMIs typically offer various communication ports, such as Ethernet, USB, RS232, or RS485. These ports allow you to connect external devices, such as PLCs, sensors, or other control equipment, for data exchange and system integration.


    Question: How can I create and modify screens on the XE Series HMI?

    Answer: XE Series HMIs usually come with dedicated software for screen development. Install the software on your computer, and then use it to design and customize screens with elements like buttons, images, text, and data display. The software often offers intuitive drag-and-drop interfaces for easy screen creation and modification.


    Question: What is the price of Weinview MT8150XE Touch Screen Monitor Front Overlay?

    Answer: Submit a fast quote, send VICPAS an email for best price.

    Common misspellings: 

    MT8050XE

    MT8150TE

    MT8151XE

    MT8510XE

    MT81E50X