6AV6645-7CG30-1WP1 Membrane Keypad Touch Screen Glass

Order each part separately is available

Notice

The protective cover provides mechanical protection of the 6AV6645-7CG30-1WP1 Touch Screen Glass Operator Keyboard and is attached to both handles. It protects the device from being damaged when transported, for example, in a tool bag together with other tools.

If you use the protective cover when the HMI device is on, the device may overheat. Make sure the HMI device is off before you fit the protective cover. Damage to the 6AV6 645-7CG30-1WP1 Touch Screen Panel Membrane Keypad Particles of dirt can scratch the touch screen when you attach the protective cover. Clean the 6AV66457CG301WP1 Touch Membrane Terminal Keypad before attaching the protective cover or use a protective sheet.

The inclination can be adjusted in the range from almost parallel to almost perpendicular to the mounting surface. To adjust the inclination, loosen the wing screws located on both sides of the wall bracket. With very large inclinations, the device cannot be removed from the wall bracket. In this case, reduce the inclination in order to remove the device safely from the wall bracket and make sure not to drop 6AV6 645-7CG30-1WP1 Touch Screen Display Membrane Keyboard.

VICPAS supply 6AV66457CG301WP1 Siemens Mobile Client 900 Touch Digitizer Membrane Switch Keypad. All of them with VICPAS 365 days warranty and support Urgent Worldwide Shipping.