IPC 477E 6AV7241-5KB05-0FA2 Touch Screen Monitor Repair
IPC 477E 6AV7241-5KB05-0FA2 Touch Screen Monitor Repair
IPC 477E 6AV7241-5KB05-0FA2 Touch Screen Monitor Repair
IPC 477E 6AV7241-5KB05-0FA2 Touch Screen Monitor Repair
IPC 477E 6AV7241-5KB05-0FA2 Touch Screen Monitor Repair
IPC 477E 6AV7241-5KB05-0FA2 Touch Screen Monitor Repair
Model
6AV7241-5KB05-0FA2

Item specifics

Touch screen panel type
Capacitive
Size
19 inch
Brand
Siemens
Warranty
365 Days
Product Number
6AV7 241-5KB05-0FA2
Product Line
SIMATIC IPC477E Series
Shipping
2-4 Days
Supply Part
Touch Digitizer Glass

Review

Description

SIMATIC IPC 477E 6AV7241-5KB05-0FA2 Touch Screen Glass Replacement Repair


Siemens IPC 477E 6AV7241-5KB05-0FA2 Touch Screen Tablet Replacement

Operating a capacitive multi-touch screen device

An inadequate earth connection or the lack of one may cause malfunction of the Siemens IPC 477E 6AV7 241-5KB05-0FA2 Touch Screen. Functions may not work properly. This can result in personal injury or property damage. Always connect the device to an earth conductor. The earth conductor from the device must be connected directly to earth with low impedance (short connection, minimum cross-section 2.5 mm2). Incorrect operation of devices with IPC477E 6AV7241-5KB05-0FA2 Touch Membrane can occur. This can result in personal injury or property damage. Take the following precautions: Configure the plant so that safety-related functions are not operated with the Simatic 6AV72415KB050FA2 Touch Panel. Switch off the device for cleaning and maintenance.

Note when operating the 6AV7 241-5KB05-0FA2 Touch Digitizer Glass:

● Surface contact with a diameter of about 5 to 20 mm is required for an operator action to be detected.
● An operation with gloves with a material thickness less than 2 mm is detected in most cases. However, check the usefulness of the gloves you are using.
● To avoid incorrect operation, certain inputs are ignored and blocked from further entry:
1. Simultaneous operation with more than 5 fingers.
2. Surface contact with a diameter of more than 3 cm, for example, resting the palm of the hand on the 6AV72415KB050FA2 HMI Touch Glass.
3. As soon as the touch screen is no longer touched, input is possible again.





Specifications:

The table below describes the parameters of the Siemens IPC477E 6AV72415KB050FA2 Touch Screen.

Relative Humidity: 90%
Product Line: IPC 477E
Environment: Free From Corrosive Gases
Warranty: 12 Months
Brand: Siemens
Part Number: 6AV7241-5KB05-0FA2
Front Panel: IP65
Touch Size: 18.5''
Resolution: 1366 x 768 Pixels
Touch Type: Capacitive


Related SIMATIC IPC477 Series HMI Part No. :

SIEMENS IPC477 HMI Description Inventory status
6AV7241-1XA05-0FA0 SIMATIC IPC477E Series Touch Screen Monitor In Stock
6AV7241-3GE15-0GA7 SIEMENS IPC 477E Series MMI Touch Screen Repair Available Now
6AV7241-3KB07-0FA0 SIMATIC IPC477E Series Touch Digitizer Replacement In Stock
6AV7241-3KB33-0FA2 SIMATIC IPC 477E Series Touch Screen Replacement Available Now
6AV7241-3KB37-0FA2 SIMATIC IPC 477E Touch Panel Replacement In Stock
6AV7241-3KC35-0DA0 SIEMENS IPC477E Touch Digitizer Glass Repair Available Now
6AV7241-3XB07-0FA0 SIMATIC IPC 477E Touch Screen Glass Repair In Stock
6AV7241-5GB02-0FD0 SIMATIC IPC477E Touch Screen Panel Replacement Available Now
6AV7241-5GB05-0DA0 SIEMENS IPC 477E Touch Membrane Repair Replacement In Stock
6AV7241-5GC15-0DA0 SIMATIC IPC477E Touch Screen Glass Replacement Available Now
6AV7241-5GC35-0FA0 SIEMENS IPC 477E Touch Membrane Repair Replacement In Stock
SIMATIC IPC477 HMI Description Inventory status

SIMATIC IPC477 Series Manuals PDF Download:

  • Siemens SIMATIC IPC477E Operating Instructions Manual_compressed
  • SIEMENS 6AV7241-3KB07-0FA0 Datasheet PDF (en)
  • SIEMENS 6AV7241-3KB37-0FA2 Datasheet PDF (en)
  • SIEMENS 6AV7241-3KC35-0DA0 Datasheet PDF (en)
  • SIEMENS 6AV7241-5KB02-0FE0 Datasheet PDF (en)
  • SIEMENS 6AV7241-5KB05-0FA2 Datasheet PDF (en)
  • SIEMENS 6AV7241-5KB05-2FA0 Datasheet PDF (en)
  • SIEMENS 6AV7241-5KB37-0GA2 Datasheet PDF (en)
  • SIEMENS 6AV7241-5KG34-0FA0 Datasheet PDF (en)
  • SIEMENS 6AV7241-5KG45-0FA0 Datasheet PDF (en)
  • SIEMENS 6AV7241-5KH03-0FA0 Datasheet PDF (en)
  • SIEMENS 6AV7241-5KH07-0GA0 Datasheet PDF (en)
  • SIEMENS 6AV7241-3XB07-0FA0 Datasheet PDF (en)

  • FAQ:

    Question: How to protect my Siemens 6AV72415KB050FA2 Touch Screen Panel from Burn-in effect?

    Answer:
    • Switch on the screensaver. The backlight brightness is reduced while the screensaver is active.
    • You should also reduce the backlighting.
    • Observe the backlighting operating time.


    Question: What kind of ambient conditions should I keep and use Simatic IPC 477E 6AV7241-5KB05-0FA2 Touch Membrane?

    Answer:
    1. Against dust, moisture and heat.
    2. Do not expose to direct sunlight or to other strong sources of light.
    3. Without additional safety measures, such as a supply of clean air, 6AV7 241-5KB05-0FA2 Touchscreen may not be used in locations with harsh operating conditions caused by acidic vapors or gases.
    4. Always use suitable cleaning agents.


    Common misspellings: 

    6AV741-5KB05-0FA2
    6AV7241-55KB0-0FA2
    6AV7241-5KB05-0F2A
    6AV71241-5KB05-0FA2
    6AV7241-5KB05-F0A2