IPC477E 6AV7241-5KB02-0FE0 Touch Screen Display Repair
IPC477E 6AV7241-5KB02-0FE0 Touch Screen Display Repair
IPC477E 6AV7241-5KB02-0FE0 Touch Screen Display Repair
IPC477E 6AV7241-5KB02-0FE0 Touch Screen Display Repair
IPC477E 6AV7241-5KB02-0FE0 Touch Screen Display Repair
IPC477E 6AV7241-5KB02-0FE0 Touch Screen Display Repair
Model
6AV7241-5KB02-0FE0

Item specifics

Touch screen panel type
Capacitive
Size
18.5 inch
Brand
Siemens
Warranty
365 Days
Product Number
6AV7 241-5KB02-0FE0
Product Line
SIMATIC IPC 477E Series
Shipping
2-4 Days
Supply Part
Touch Screen Tablet

Review

Description

SIMATIC IPC 477E 6AV7241-5KB02-0FE0 Touch Screen Monitor Replacement Repair


Siemens IPC 477E 6AV7241-5KB02-0FE0 Touch Screen Film Replacement

Notes on connecting

The on/off switch does not isolate the device from the power supply. Risk of electric shock if the device is opened incorrectly or defective. There is also a risk of fire if the device or connecting lines are damaged. This will also damage the Siemens IPC477E 6AV7 241-5KB02-0FE0 Touch Screen Glass.

You should therefore protect the Simatic 6AV7241-5KB02-0FE0 Touch Panel as follows:
• Always pull out the power plug when you are not using the device or if the device is defective. The power plug must be freely accessible.
• Connect the device to a protective conductor as instructed.
• Use a central isolating switch.
The connection of I/O devices can cause faults in the device. The result may be personal injury and damage to the IPC 477E 6AV72415KB020FE0 HMI Touch Glass.
Note the following when connecting I/O devices:
• Read the documentation of the I/O devices. Follow all instructions in the documentation.
• Only connect I/O devices which are approved for industrial applications in accordance with EN 61000-6-2 and IEC 61000-6-2.
• I/O devices that are not hotplug-capable may only be connected after the device has been disconnected from the power supply.

Regenerative feedback of voltage to ground by a connected or installed component can damage both the device and Siemens 6AV7241-5KB02-0FE0 Touch Dgitizer Glass. Connected or built-in I/Os, for example, a USB drive, is not permitted to supply any voltage to the device. Regenerative feedback is generally not permitted or it will do harm to 6AV7 241-5KB02-0FE0 MMI Panel Screen.





Specifications:

The table below describes the parameters of the Siemens IPC477E 6AV72415KB020FE0 Touch Panel.

Brand: Siemens
Product Line: IPC 477E
Environment: Free From Corrosive Gases
Warranty: 12 Months
Touch Type: Capacitive
Part Number: 6AV7241-5KB02-0FE0
Storage Temperature: -20~60°C
Touch Size: 19''
Resolution: 1366 x 768 Pixels
Display Type: TFT LCD


Related SIMATIC IPC477 Series HMI Part No. :

SIEMENS IPC477 HMI Description Inventory status
6AV7241-1XA05-0FA0 SIMATIC IPC477E Series Touch Screen Monitor In Stock
6AV7241-3GE15-0GA7 SIEMENS IPC 477E Series MMI Touch Screen Repair Available Now
6AV7241-3KB07-0FA0 SIMATIC IPC477E Series Touch Digitizer Replacement In Stock
6AV7241-3KB33-0FA2 SIMATIC IPC 477E Series Touch Screen Replacement Available Now
6AV7241-3KB37-0FA2 SIMATIC IPC 477E Touch Panel Replacement In Stock
6AV7241-3KC35-0DA0 SIEMENS IPC477E Touch Digitizer Glass Repair Available Now
6AV7241-3XB07-0FA0 SIMATIC IPC 477E Touch Screen Glass Repair In Stock
6AV7241-5GB02-0FD0 SIMATIC IPC477E Touch Screen Panel Replacement Available Now
6AV7241-5GB05-0DA0 SIEMENS IPC 477E Touch Membrane Repair Replacement In Stock
6AV7241-5GC15-0DA0 SIMATIC IPC477E Touch Screen Glass Replacement Available Now
6AV7241-5GC35-0FA0 SIEMENS IPC 477E Touch Membrane Repair Replacement In Stock
SIMATIC IPC477 HMI Description Inventory status

SIMATIC IPC477 Series Manuals PDF Download:

  • Siemens SIMATIC IPC477E Operating Instructions Manual_compressed
  • SIEMENS 6AV7241-3KB07-0FA0 Datasheet PDF (en)
  • SIEMENS 6AV7241-3KB37-0FA2 Datasheet PDF (en)
  • SIEMENS 6AV7241-3KC35-0DA0 Datasheet PDF (en)
  • SIEMENS 6AV7241-5KB02-0FE0 Datasheet PDF (en)
  • SIEMENS 6AV7241-5KB05-0FA2 Datasheet PDF (en)
  • SIEMENS 6AV7241-5KB05-2FA0 Datasheet PDF (en)
  • SIEMENS 6AV7241-5KB37-0GA2 Datasheet PDF (en)
  • SIEMENS 6AV7241-5KG34-0FA0 Datasheet PDF (en)
  • SIEMENS 6AV7241-5KG45-0FA0 Datasheet PDF (en)
  • SIEMENS 6AV7241-5KH03-0FA0 Datasheet PDF (en)
  • SIEMENS 6AV7241-5KH07-0GA0 Datasheet PDF (en)
  • SIEMENS 6AV7241-3XB07-0FA0 Datasheet PDF (en)

  • FAQ:

    Question: Can I clean Siemens 6AV7 241-5KB02-0FE0 HMI Touchscreen?

    Answer: Yes. But make sure to turn off the HMI device before cleaning it. If you clean the glass front while it is on, you might accidentally trigger the touchscreen.


    Question: How to protect my Siemens 6AV72415KB020FE0 Touch Screen Panel from Burn-in effect?

    Answer:
    • Switch on the screensaver. The backlight brightness is reduced while the screensaver is active.
    • You should also reduce the backlighting.
    • Observe the backlighting operating time.


    Question: Why my Simatic IPC 477E 6AV7241-5KB02-0FE0 Touch Panel is locked?

    Answer: Because there is a conductive liquid on the touch screen with ground contact via the enclosure or the operator. Electromagnetic interference is present that exceeds the specification according to EN 61000-4-2. Once the interference is over, the touch screen is no longer locked.


    Common misspellings: 

    6AV7214-5KB02-0FE0
    6AV72415-KB02-0FE0
    6AV7241-5KB02-FE0
    6AV724-5KB02-0FE1
    6AV7241-5B02-0EF0