Kawasaki 50817-1388 Teach Pendant Parts for repair
Kawasaki 50817-1388 Teach Pendant Parts for repair
Kawasaki 50817-1388 Teach Pendant Parts for repair
Kawasaki 50817-1388 Teach Pendant Parts for repair
Kawasaki 50817-1388 Teach Pendant Parts for repair
Kawasaki 50817-1388 Teach Pendant Parts for repair
Model
50817-1388

Item specifics

Warranty
365 Days
Shipping
2-4 workdays
Brand
Kawasaki
Supply Parts
Teach Pendant Parts

Review

Description

Kawasaki Robot 50817-1388 Teach Pendant HMI Case Touch Membrane Terminal Keypad LCD Screen

Order each part separately is available

Kawasaki Robot 50817-1388 Teach Pendant Touch Panel LCD Display Plastic Cover Terminal Keypad repair

Warning


This Kawasaki robot pendant 50817-1388 Screws, Keypad Membrane, HMI Case, E-Stop Button Label, LCD Screen, Hanger and Touch Screen Panel Teach Pendant is compound explosion-proof type that is constructed with pressurized mechanism and intrinsically safe construction mechanism.

The Kawasaki robot arm and painting device are explosion proofed by a built-in pressurizing mechanism that keeps air within the machine at a higher pressure than the paint booth. This stops gases from entering construction parts and prevents any ignition danger at robot arm's motors/encoders (at normal operation), electrical connections, etc.

The explosion-proof robot protects the motor and machine harness in the arm from explosive gases using pressurized air. However, this protection does not extend to the separate harness connecting the arm with the controller. Make sure the separate harness and Kawasaki robot pendant 50817-1388 Terminal Keypad, Hanger, Touch Digitizer, LCD Display, Screws, E-Stop Button Label and Plastic Shell Teach Pendant is not directly exposed to a large quantity of solvent, since the solvent may damage cable coatings causing earth faults or short circuits that may lead to fire. Also, inspect the surface of cable and protecting tube regularly for damage, and replace the separate harness every three to five years.

Purge all explosive gases first before supplying power to Kawasaki robot parts 50817-1388 Hanger, Front Case, Back Cover, HMI Touch Glass, Membrane Keyboard, LCD Panel, Screws and E-Stop Button Label Teach Pendant. Install a pressure detection device in the booth that activates automatically if air pressure drops due to error etc. so that power supply can be cutoff immediately (Interlock). Also, power supply must be disabled until the purging is confirmed to be complete, even if the error is cancelled.

For intrinsically safe devices, energy supply to them is limited so that they may not cause explosion within the paint booth under any possible operation or condition. This construction applies to the Kawasaki robot parts 50817-1388 Screws, Housing, E-Stop Button Label, LCD Display Screen, Membrane Switch, Touch Screen Tablet and Hanger Teach Pendant, device to detect the pressure in enclosures and the encoders (only in backup mode).




Specifications:

The table below describes the parameters of the Kawasaki Robot 50817-1388 Teach Pendant.

Display Type: Color LCD Display
Product Line: Kawasaki Robotics
Model Number: 50817-1388
Touch Screen: Analog Resisitive Film
Brand: Kawasaki
Operating Temperature: 0 ~ 45°C
Altitude: Up to 1000m Above Sea Level
Corrosion Immunity: Free from corrosive gases
Storage Humidity: 35 to 85% RH
Warranty: 1-Year Warranty


Related Kawasaki Robot Teach Pendant No. :

Kawasaki Teach Pendant Description Inventory status
50817-0009 Kawasaki Robot Pendant Touch Switch Membrane LCD Case Replacement In Stock
50817-1297 Kawasaki Robotics Touch Screen Membrane Keyboard LCD Housing Repair Available Now
50817-1298 Kawasaki Teach Pendant Touch Panel Keypad Membrane LCD Shell Repair In Stock
50817-1299 Kawasaki Robotics Keyboard Membrane Touch LCD Display Cover Replacement Available Now
50817-1347 Kawasaki Robot Touch Screen Operator Keyboard LCD Enclosure Repair In Stock
50817-1428 Kawasaki Robotics Touch Glass Terminal Keypad LCD Cover Repair In Stock
50817-1457 Kawasaki Robot Panel Glass Membrane Keypad LCD Case Replacement Available Now
50817-1461 Kawasaki Teach Pendant Touchpad Operator Keyboard LCD Shell Repair In Stock
Kawasaki Teach Pendant Description Inventory status

Kawasaki Robot Teach Pendant Manuals PDF Download:

  • E5x_Controller-Installation_and_Connection_Manual-E
  • Kawasaki Robot Controller E Series Operation Manual


  • FAQ:

    Question: What are the functions of keys of the Kawasaki 50817-1388 Membrane Keypad?

    Answer:
    What are the functions of keys of the Kawasaki 50817-1388 Membrane Keypad?


    Question: Is Kawasaki 50817-1388 Teach Pendant Touch Screen and LCD Display compatible with most robot models?

    Answer: Yes. Kawasaki 50817-1388 Touch Membrane and LCD Screen Teach pendant is compatible with most robot models and applications, except explosion-proof painting applications. For arc welding applications, the hard key layout sheet is different.

    Common misspellings: 

    0817-1388

    5081-1388

    50817-138

    05817-1388

    50817-1838