M2I TOPRH Wired Series TOPRH0700WD FE Glass Overlay
- Model
- M2I TOPRH0700WD FE
Item specifics
- Brand
- M2I
- Size
- 7 inch
- Warranty
- 365 Days
- Product Line
- M2I TOPRH Wired Series
- Supply
- TOPRH0700WD FE Front Overlay Touch Screen
- Shipping
- 2-4 workdays
- Part Number
- M2I TOPRH Wired Series TOPRH0700WD FE
Review
Description
M2I TOPRH Wired Series TOPRH0700WD FE Protective Film Touch Panel Replacement
Order each part separately is available
Installation Requirements
1. For the performance, ventilation and safe use of the TOPRH0700WD FE Touch Screen Film Front Overlay equipment, keep the distance between the back of the main unit and each wall of the container at least 100mm and install the cooling fan when installed in an enclosed space.
2. It should be installed within -10~50C and 10~80%relative-humidity, otherwise the screen may be changed or cause malfunction and damage.
3. Be sure that heat from surrounding M2I TOPRH Wired Series TOPRH0700WD FE Protective Film Touch Membrane equipment does not cause product to exceed its standard operating temperature.
4. When you don't see within 30, you may not see clearly. When installing the product in a slanted position, the product screen should not incline more than 30.
5. In order to minimize external mechanical hazards of TOPRH0700WD FE Front Overlay HMI Panel Glass, please control the mechanical hazards of the surrounding environment.
Installation Procedure Warning
In order to install TOPRH0700WD FE Touch Screen Glass Protective Film product, please follow the following procedure.
1. Panel Cut-out: Make a panel cut which product is mounted and insert the product to the panel from the front side.
2. The Size of Panel Cut of TOPRH0700WD FE Touchscreen Front Overlay: Making the Panel Cut (Mounting Size) per each TOPRW Series as below Table, before Installation.
3. Fixing: Install clamps with this product should be installed as follows to maintain the IP performance of the device.
a.Insert the clamp into the slot of the product.
b.Screw the unit into the TOPRH0700WD FE Protective Film Touch Digitizer panel cut with a screwdriver.
Specifications:
The table below describes the parameters of the M2I TOPRH0700WD FE Touch Digitizer Glass Front Overlay HMI Parts.
Screen Type: | Analog Resistive Film |
Status LED: | Built-in |
Display Type: | TFT Color |
Display Color: | 65536 Color |
Ambient Humidity: | 85% RH or less |
Operation Temperature: | 0°C ~ +50°C |
Product Line: | TOPRH Wired Series |
Warranty: | 365 Days |
Storage Temperature: | -10°C ~ +60°C |
Backlight: | Yes |
Related M2I HMI Part No. :
M2I HMI | Description | Inventory status |
TOPRE0400WD | M2I TOPRE Series Touch Screen Film Front Overlay Replacement | In Stock |
TOPRHO700WD-W | M2I TOPRH Wireless Model Front Overlay Touch Panel Replacement | In Stock |
TOPRW0700WD-IO | M2I TOPRW-IO Series HMI Touch Membrane Protective Film Repair | Available Now |
TOPRW0710WD-IO | M2I TOPRW-IO Series Touch Screen Display Front Overlay Replacement | In Stock |
M2I HMI | Description | Inventory status |
M2I TOPRH Wired Series HMI Manuals PDF Download:
FAQ:
Question: What are the front part names and specifications of M2I TOPRH0700WD FE?
Answer: The front part names and specific cation of TOPRH0700WD FE are TFT 16M Color LCD, Analog Touch Panel and Front Cover Sheet for Damp Proof and Dust Proof.
Question: What is the display size of TOPRH0700WD FE Touchscreen Panel Front Overlay?
Answer: The TOPRH0700WD FE Protective Film HMI Panel Glass is 7 inch.
Question: What is the memory specifications of TOPRH0700WD FE?
Answer:
Common misspellings:
OPRH0700WD FETOPRH0700WD E
TOPRHH0700WD FE
TOPRH0700WD FFE
TOPRH0700W DFE