EZAutomation EZ7DT-T10C-E EZ7DT-T10C-EH EZ7DT-T12C-E EZ7DT-T12C-EH Protective Film Glass

FAQ:

Question: Maintaining the Ambient Operating Conditions

Solution: Keeping the EZ7 Series EZ7DT-T10C-E EZ7DT-T10C-EH EZ7DT-T12C-E EZ7DT-T12C-EH Protective Film Touch Screen Monitor HMI's environment within specified operating conditions is the best method to minimize maintenance.
1. Always ensure that the ambient temperature inside the cabinet is within EZ7 Series HMI’s temperature ratings.
2. If any other equipment inside or outside of the cabinet is producing heat, employ cooling methods like a blower fan to reduce 'hot spots' around the EZ7 Series HMI
3. Periodically inspect and clean if there are any air filters on the cabinet. Ensure that the PLC is free from dust, humidity and corrosive gases.

Question: How to test the EZ7DT-T10C-E EZ7DT-T10C-EH EZ7DT-T12C-E EZ7DT-T12C-EH touchpad response?

Answer:
1. Press the Touchpad Test button.

2. A new screen will appear. Press each box individually to ensure that the touchscreen is properly responding.
3. Once finished, press Exit to return to the previous screen. Pressing Exit again will bring you back to the main screen.

Question: How to test the EZ7DT-T10C-E EZ7DT-T10C-EH EZ7DT-T12C-E EZ7DT-T12C-EH pixel display?

Answer:
1. Press the Display Test button.

2. The screen will then automatically go through a variety of colors. Verify if all elements of the screen are lighting up appropriately.
3. Once finished, press Exit to return to the previous screen. Pressing Exit again will bring you back to the main screen.