Panasonic AIG12MQ12D Protective Film Panel Glass
- Model
- AIG12MQ12D
Item specifics
- Brand
- Panasonic
- Size
- 4.6 inch
- Warranty
- 365 Days
- Product Line
- Panasonic GT Series
- Supply
- GT12 GT12M1 Touch Screen and Overlay
- Part Number
- AIG12MQ12D
- Shipping
- 2-4 workdays
Review
Description
Panasonic GT12 GT12M1 AIG12MQ12D Front Overlay Touch Panel Replacement
Order each part separately is available
Precautions when connecting Panasonic GT AIG12MQ12D
-If noise is a problem, use a shielded cable and employ countermeasures such as installing a ferrite core if necessary. Also, take measures so that the shielding doesn't peel off and noise such as static electricity does not interfere.
-The number of AIG12MQ12D Touch Screen Panel Glass Front Overlay units, transmission distance and baud rate may differ depending on the device connected. Verify with the AIG12MQ12D Touch Panel Protective Film device being used.
-The maximum cable length for RS232C type is 15 m, also RS422 (5 V) type is 30 m.
-The maximum transmission distance is 500 m for the 24 V RS422 type.
-When connecting to the RS485, it may not be connected depending on the timing for switching between the transmission and reception at the external device. Please check it using the actual equipment.
The Panasonic GT12 GT12M1 AIG12MQ12D Protective Film Touch Digitizer Glass terminal unit setting varies according to the external device to be connected. Confirm it before setting a AIG12MQ12D HMI Panel Glass Front Overlay terminal unit.
Specifications:
The table below describes the parameters of the Panasonic GT12 GT12M1 AIG12MQ12D Touch Screen Monitor Front Overlay HMI Parts.
| Backlight: | 3-color LED |
| Brand: | Panasonic |
| Warranty: | 365 Days |
| Product Line: | Panasonic GT12M1 |
| Resolution: | 320 (W) × 120 (H) dots |
| Ambient temperature: | 0 to +50 °C +32 to +122 °F |
| Display Type: | STN monochrome LCD |
| Part Number: | AIG12MQ12D |
| Power supply: | 24 V DC |
| Touch Size: | 4.6" |
Related Panasonic GT Series HMI Part No. :
| Panasonic GT12 | Description | Inventory status |
| AIG12MQ02D | Panasonic GT12 GT12M0 Touch Screen Panel Front Overlay Repair | In Stock |
| AIG12MQ03D | Panasonic GT12 GT12M0 Front Overlay Touch Membrane | In Stock |
| AIG12MQ04D | Panasonic GT12 GT12M0 Touch Glass Front Overlay Repair | In Stock |
| AIG12MQ05D | Panasonic GT12 GT12M0 Touch Digitizer Glass Overlay Repair | Available Now |
| AIG12MQ12D | Panasonic GT12 GT12M1 MMI Touch Screen Front Overlay Replacement | In Stock |
| AIG12MQ13D | Panasonic GT12 GT12M1 HMI Touch Screen Protective Film | Available Now |
| AIG12MQ14D | Panasonic GT12 GT12M1 HMI Panel Glass Protective Film | Available Now |
| AIG12MQ15D | Panasonic GT12 GT12M1 Touch Screen Monitor Front Overlay | In Stock |
| Panasonic GT12 | Description | Inventory status |
Panasonic GT Series HMI Manuals PDF Download:
FAQ:
Question: What to DO If Panasonic AIG12MQ12D Touch Screen Panel is dim？
Answer:
1) The power voltage may be low.
Check the capacity of the power supply unit if it is enough for the GT's power consumption.
2) The contrast is set too low.
Bring up the system menu and adjust the contrast.
3) The AIG12MQ12D backlight is off due to the [Backlight Auto-off] setting in the [Setup] of the GT configuration settings in GTWIN.
Touching any area of the AIG12MQ12D screen lights that area. If a switch part is set on the touched area, the area will not light even if touched. To change the setting, change the content of the backlight auto-off settings.
Question: What to DO If Panasonic GT12 GT12M1 AIG12MQ12D Touch Screen is blank？
Answer:
1) Power is not on.
Supply the power supply to the Panasonic AIG12MQ12D Touch Digitizer Glass Protective Film unit as per specifications.
2) (When only lamp and message parts are configured to the base screen) Value of substitute reference device value does not exist in substitute data.
Check the address of the substitute reference device and the device values on the PLC side.
Common misspellings:
AIG12Q12DAG12MQ12D
AIG12QM12D
AIG12MQ1ZD
AIG12MQ12DD
