Higgstec Touch Panel HT-192F-5RB-005N-28R-200FH
Higgstec Touch Panel HT-192F-5RB-005N-28R-200FH
Higgstec Touch Panel HT-192F-5RB-005N-28R-200FH
Higgstec Touch Panel HT-192F-5RB-005N-28R-200FH
Higgstec Touch Panel HT-192F-5RB-005N-28R-200FH
Higgstec Touch Panel HT-192F-5RB-005N-28R-200FH
Model
HT-192F-5RB-005N-28R-200FH

Item specifics

Brand
Higgstec Touch Screen
Warranty
365 Days
Supply
HT-192F-5RB-005N-28R-200FH Touch Digitizer Glass
Size
19.2 inch
Touch Screen Type
Resistance touch screen

Review

Description

Higgstec HT-192F-5RB-005N-28R-200FH Touch Screen Panel Glass Repair


Higgstec HT-192F-5RB-005N-28R-200FH Touch Screen Panel Replacement

A modification of our 5-wire resistive technology suitable to be used in full outdoor applications, where bright sunlight can potentially make the HT-192F-5RB-005N-28R-200FH touch screen unreadable. HT-192F-5RB-005N-28R-200FH Touch Screen Monitor Higgstec's Sunlight Readable solution dramatically reduces reflectance and increases contrast ratio, while also preventing birefringence when the screen is viewed through polarizer sunglasses, making HT-192F-5RB-005N-28R-200FH Touch Screen Panel a popular choice for military, automotive and other outdoor use applications.


A polarizer and two layers of 1/4 wavelength retardation film are added to the stack-up of our 5-wire HT-192F-5RB-005N-28R-200FH resistive touch panel. In addition, the ITO coated film is made from non-PET isotropic material. When an incoming light ray passes through the touch panel it is transformed from unpolarized light into circular-polarized light. Then as it is reflected, it is transformed again from circular-polarized light into linear-polarized light. The HT-192F-5RB-005N-28R-200FH Touch Digitizer Glass HMI light ray is unable to pass back through the front polarizer, and internal reflection is eliminated. VICPAS supplies HT-192F-5RB-005N-28R-200FH HMI panel glass with VICPAS 365 days warranty and supports Urgent Worldwide Shipping.





Specifications:

The table below describes the parameters of the Higgstec HT-192F-5RB-005N-28R-200FH Touchscreen Parts.

Part Number: HT-192F-5RB-005N-28R-200FH
Display: TFT
Warranty: 365 days Warranty
Size: 19.2 inch
Light Transmittance: 80% ± 3%
Resolution: 4096 X 4096
Number of Touches: Single
Operation Temperature: -10~+70°C
Response time: ≦ 20ms
Surface Hardness: ≧ 3H


Related Higgstec Touch Screen HMI Part No. :

Higgstec Touch Screen Description Inventory status
HT-150F-5RA-001N-28R-200FH Higgstec Touch Screen Glass Repair Replacement In Stock
HT-150F-5RB-004N-18R-200FH Higgstec Touch Screen Panel Replacement Available Now
HT-150F-5RB-A04N-28R-200FH Higgstec HMI Touchscreen Repair Part In Stock
HT-150F-5RB-G04N-18R-200FL Higgstec HMI Touch Screen Glass Available Now
HT-170F-5RB-004N-18R-200FH Higgstec Touch Screen Panel Repair In Stock
HT-171F-5RA-001N-28R-300FH Higgstec Touch Membrane Repair In Stock
HT-190F-5RB-001N-28R-300FH Higgstec HMI Touch Glass Repair In Stock
HT-192F-5RA-002N-28R-200FH Higgstec Touch Digitizer Glass Repair Available Now
HT-192F-5RB-005N-28R-200FH Higgstec HMI Panel Glass Replacement Available Now
Higgstec Touch Panel Description Inventory status

Higgstec Touch Screen Panel HMI Manuals PDF Download:

  • Higgstec HT-064F-5RA-003N-11R-080FH Manual Datasheet
  • Higgstec HT-070F-5RB-A05N-11R-200FH Manual Datasheet
  • Higgstec HT-084F-5RA-002N-18R-150FH Manual Datasheet

  • FAQ:

    Question: Attention of Higgstec HT-192F-5RB-005N-28R-200FH Touch Panel Mounting Condition?

    Answer:
    (1) The gasket support of the HT-192F-5RB-005N-28R-200FH touch panel must allocate outside of Viewable Area. Reserve enough clearance between HT-192F-5RB-005N-28R-200FH panel surface and enclosure for normal panel operation.
    To avoid pressing error, please retain enough space between the HT-192F-5RB-005N-28R-200FH surface panel and Bezel.
    (2) Bezel opening must not touch HT-192F-5RB-005N-28R-200FH touch digitizer Viewable Area; Bezel opening must be designed between HT-192F-5RB-005N-28R-200FH touchscreen panel screen Viewable Area and Active Area.
    (3) We recommend elastic material support.
    (4) Due to the conductive characteristic of the panel backside, prevent metal contact after mounting.
    (5) Do not use adhesive to bond top surface (ITO Film) of HT-192F-5RB-005N-28R-200FH touch panel with enclosure.
    (6) Proper grounding of the controller at all times assures normal operation.
    (7) During assembly. Please take into consideration the variance in the different module designs, whether it would cause physical, cosmetic or functional damages to the HT-192F-5RB-005N-28R-200FH touch panel when completing the assembly.
    (8) After installation,please perform 4 point and 25-point calibration.
    Attention of Higgstec HT-192F-5RB-005N-28R-200FH Touch Panel Mounting Condition?


    Common misspellings: 

    HT-192F5RB-005N-28R-200FH
    TH-192F-5RB-005N-28R-200FH
    HT-192F-5RB-005N-28R-Z00FH
    HT-192F-5RBB-005N-28R-200FH