6SE9212-7DA40 6SE9212-8BA40 6SE9212-8CA40 HMI Enclosure
6SE9212-7DA40 6SE9212-8BA40 6SE9212-8CA40 HMI Enclosure
6SE9212-7DA40 6SE9212-8BA40 6SE9212-8CA40 HMI Enclosure
6SE9212-7DA40 6SE9212-8BA40 6SE9212-8CA40 HMI Enclosure
6SE9212-7DA40 6SE9212-8BA40 6SE9212-8CA40 HMI Enclosure
6SE9212-7DA40 6SE9212-8BA40 6SE9212-8CA40 HMI Enclosure
Model
6SE9212-7DA40 6SE9212-8BA40 6SE9212-8CA40

Item specifics

Supply
Siemens Micromaster Plastic Shell
Warranty
365 Days
Shipping
DHL/FedEx/UPS/TNT/EMS/Aramex /DPEX
Name
6SE9212-7DA40 6SE9212-8BA40 6SE9212-8CA40

Review

Description

Siemens Micromaster 6SE9212-7DA40 6SE9212-8BA40 6SE9212-8CA40 Plastic Cover Repair

Siemens Micromaster 6SE9212-7DA40 6SE9212-8BA40 6SE9212-8CA40 HMI Case Repair

It comprises of three frame sizes offering IP20 protection. The 6SE9212-7DA40 6SE9212-8BA40 6SE9212-8CA40 Plastic Shell MICROMASTER Vector is form and fit identical to the MICROMASTER, however its functionality and dynamic performance is much superior with the addition of Sensorless Vector Control, additional I/O and larger intelligent power modules to cope with the additional overload requirements. The 6SE9212-7DA40 6SE9212-8BA40 6SE9212-8CA40 Plastic Case Body MIDIMASTER Vector has identical features to the 6SE9212-7DA40 6SE9212-8BA40 6SE9212-8CA40 Enclosure MICROMASTER Vector whilst extending its power range to 75kW (90kW variable torque). In standard form the protection rating is IP21, however it is also available in IP56 (NEMA 4).


Benefits of Sensorless Vector Control
• Excellent speed control with inherent slip compensation.
• High Torque at low speed without excessive boost.
• Lower losses, higher efficiency.
• Higher dynamic performance - better response to step loads.
• Stable operation with large motors.
• Better performance at current limit with improved slip control.



Related Siemens Siemens Micromaster Part No. :

Simatic Micromaster Description Inventory status
6SE9212-1BA40 SIMATIC Siemens Micromaster Plastic Shell In Stock
6SE9212-1CA40 Siemens Micromaster Vector Plastic Enclosure Available Now
6SE9212-3DB40 Siemens Micromaster Drive Plastic Case Repair In Stock
6SE9212-7DA40 SIMATIC Siemens Micromaster Drive HMI Case Available Now
6SE9212-8BA40 SIMATIC Siemens Micromaster Inverter HMI Case In Stock
6SE9212-8CA40 Siemens Micromaster Inverter Plastic Cover In Stock
6SE9213-6BA40 Siemens Micromaster Vector Plastic Shell In Stock
6SE9213-6CA40 Siemens Micromaster VFD Plastic Housing Available Now
6SE9214-0DA40 Siemens Micromaster Inverter Plastic Cover Available Now
6SE9513-0DA40 SIMATIC Siemens Micromaster Plastic Case In Stock
6SE9513-8CA40 SIMATIC Micro Master Plastic Housing In Stock
6SE9514-0DA40 Siemens Micromaster Inverter HMI Enclosure In Stock
Siemens Micro Master Description Inventory status


Siemens Micromaster Vector Manuals PDF Download:

  • Simatic Siemens Micromaster 6SE92_Manual
  • Simatic Siemens Micromaster Vector Manual
  • Micromaster Drives 6SE92 Commissioning Manual

  • FAQ:

    Question: If the 6SE9212-7DA40 6SE9212-8BA40 6SE9212-8CA40 Enclosure Motor Does Not Start Up, what should we do?

    Answer:If the motor does not start up when the ON command has been given, check that the ON command is valid, check if a frequency setpoint has been entered in P005 and check that the motor specifications have been entered correctly under parameters P081 to P085.
    If the inverter is configured for operation via the front panel (P007 = 001) and the motor does not start when the RUN button is pressed, check that P121 = 001 (RUN button enabled).
    If the motor does not run after parameters have been changed accidentally, reset the inverter to the factory default parameter values by setting parameter P944 to 001 and then pressing P.


    Common misspellings: 

    6SE921-7DA40
    SE9212-7DA40
    6SE9221-8BA40
    6SE9212-88A40
    6SE92l2-8CA40
    6SE92122-8CA40