6AG1124-0JC01-4AX0 TP900 Comfort Aluminum Enclosure
- Model
- 6AG1124-0JC01-4AX0
Item specifics
- Brand
- Siemens
- Warranty
- 365 Days
- Product Line
- TP900 Comfort
- Supply
- Siemens TP900 Touch Film LCD Aluminum Case
- Size
- 9 inch
- model
- 6AG1 124-0JC01-4AX0
- Parts
- Touch Screen, Shell, Protective film, LCD Panel
Review
Description
6AG1124-0JC01-4AX0 Siemens SIPLUS HMI TP900 COMFORT 6AG1 124-0JC01-4AX0 Touch Screen, Front Overlay, Aluminum Case Cover, Gasket, Mounting Clips, Plastic Cover Body, Power Supply Connector, Screws, LCD Display Repair Replacement
Order each part separately is available
VICPAS supply 6AG1124-0JC01-4AX0 Siemens TP900 comfort touch panel, Protective Film, Aluminum Front, Plastic Case, Mounting Clips, Power Supply Connector, Gasket, Screws, HMI Case and LCD display. All of them with VICPAS 365 days warranty and support Urgent Worldwide Shipping.
Functions of the capacitive single-touch screen
Simatic 6AG1124-0JC01-4AX0 Touch Film LCD Aluminum Case HMI General functions
● Automatic calibration of the 6AG1124-0JC01-4AX0 touch screen during startup; manual calibration is not necessary. For this reason, the "Touch" tab does not exist in the "OP Properties" dialog for PRO devices.
● Touch and gesture operation analog to the operating options described in the "Comfort Panels" operating instructions.
Security functions in an industrial environment
The 6AG1124-0JC01-4AX0 touch screen is locked for security reasons when the following happens:
● There is a conductive liquid on the 6AG1124-0JC01-4AX0 touch screen with ground contact via the enclosure or the operator, for example.
● Electromagnetic interference is present that exceeds the specification according to EN 61000-4-2.
Once the interference is over, the touch screen is no longer locked.
Specifications:
The table below describes the parameters of the 6AG1124-0JC01-4AX0 Siemens TP900 Comfort HMI Parts.
| Part Number : | 6AG1 124-0JC01-4AX0 |
| Touchscreen: | colour LCD display |
| Display | “ TFT-LCD dynamic color screen |
| Warranty: | 365 days Warranty |
| Product Line: | Siemens TP900 Comfort |
| Active power input, typ.: | 18 W |
| Mounting position: | vertical |
| Key Features: | Touch screen support |
| Language: | Worldwide |
| Type of supply voltage | DC |
Related Simatic TP900 Comfort Part No. :
| Siemens TP900 Comfort | Description | Inventory status |
| 6AG1124-0JC01-4AX0 | SIMATIC HMI TP900 COMFORT Aluminum Enclosure | In Stock |
| 6AV2124-0JC01-0AX0 | SIMATIC HMI TP900 COMFORT Aluminum Housing | Available Now |
| 6AV2144-8JC10-0AA0 | SIPLUS HMI TP900 COMFORT INOX Aluminum Case | In Stock |
| SIMATIC HMI TP900 Comfort | Description | Inventory status |
Siemens TP900 Comfort HMI Manuals PDF Download:
FAQ:
Question: How to restore data of the the 6AG1124-0JC01-4AX0 Siemens TP900 Comfort Touch Glass Front Overlay LCD Display Aluminum Cover HMI device?
Answer: To restore the data of the HMI device, follow these steps:
1. Select the "Restore" command in the "Online > HMI device maintenance" menu.
2. Under "Opening...", enter the name of the backup file.
Information about the selected backup file is displayed under "Content".
3. Click "Start Restore".
This starts the restoration. This process can take time, depending on the connection selected.
Question: How to install a strain relief for Siemens TP900 Comfort 6AG1124-0JC01-4AX0?
Answer:Install the strain relief in the terminal compartment as follows:
1. Loosen the two screws of the terminal compartment cover and remove the terminal compartment cover.
2. Fasten the strain-relief with the screws intended for this purpose, torque 0.8 Nm.
In the delivery state, the screws are already pre-installed in the terminal compartment.
The following figure shows an example.
With PRO devices for support arm (not extendable, flange top), the strain relief is to be installed rotated by 180°.
3. If you do not install the device to a support arm or a pedestal immediately afterwards, close the terminal compartment. Fasten the terminal compartment cover with the two associated screws, torque 1.5 Nm. Check that the seal is sitting correctly.
Question: What is the size of Siemens TP900 6AG1124-0JC01-4AX0 touch screen panel glass?
Answer:The Siemens TP900 Comfort Touch Screen is 9-inch. It is 212 millimeter long and 132 millimeters wide.
Common misspellings:
6G1124-0JC01-4AX06AG1124-0JC1-4AX0
6AG1214-0JC01-4AX0
6AG1124-0JCO1-4AX0
6AG11224-0JC01-4AX0
