FAGOR CNC 8035-M-COL-2 Terminal Keypad Replacement
- Model
- FAGOR CNC 8035-M-COL-2
Item specifics
- Brand
- Fagor
- Warranty
- 365 Days
- Supply
- FAGOR CNC 8035-M-COL-2 Keypad Membrane Replacement
- Model
- FAGOR CNC 8035-M-COL-2
Review
Description
FAGOR CNC 8035-M-COL-2 Membrane Keypad Keyboard Repair Replacement
A FAGOR CNC 8035-M-COL-2 Terminal keypad CNC machine needs the following origin and reference points defined:
• Machine Reference Zero or home. This is set by the manufacturer as the origin of the coordinate system of the FAGOR CNC 8035-M-COL-2 Membrane keyboard machine.
• Part zero or point of origin of the part. This is the origin point that is set for programming the measurements of the part. It can be freely selected by the programmer, and its FAGOR CNC 8035-M-COL-2 Keypad Membrane machine reference zero can be set by the zero offset.
• Machine Reference point. This is a point on the machine established by the manufacturer around which the synchronization of the system is done. The control positions the axis on this point, instead of moving it as far as the Machine Reference Zero, taking, at this point, the reference coordinates which are defined via the axis machine parameter “REFVALUE”.
Specifications:
The table below describes the parameters of the FAGOR CNC 8035-M-COL-2 Keyboard Membrane.
| Part Number: | FAGOR CNC 8035-M-COL-2 |
| Backlight: | LED |
| Warranty: | 365 Days |
| Product Line: | Fagor series |
| Input Power: | 24VDC (+10%, -15%) |
| Operating Temperature: | 0 to 50 °C |
| Storage Temperature: | -20 to +70 °C |
Related Fagor Series Part No. :
| Fagor CNC Automation | Description | Inventory status |
| FAGOR CNC 8025T-I | Membrane Keyboard Fagor Electronics Replacement | In Stock |
| Fagor CNC 8035-M-COL-2 | Fagor CNC Membrane Keyboard Keypad Repair Part | Available Now |
| Fagor CNC 8035-M-COL-R-2 | Fagor Automation Membrane Keypad Switch Repair Part | In Stock |
| FAGOR CNC 8035-M-COL-R-CAN-2 | Fagor Automation Membrane Keypad Overlay Replace | Available Now |
| FAGOR CNC 8035-T-COL-2 | Fagor CNC Controllers Membrane Keypad | In Stock |
| FAGOR CNC 8040 | Fagor CNC HMI Membrane Switch Replacement | In Stock |
| FAGOR CNC 8040-M-MON | HMI Operator Panel Keypad Fagor Replacement | Available Now |
| Fagor CNC 8040-M-MON-K | Fagor CNC Parts Machine Operator Keyboard | In Stock |
| FAGOR CNC 8050AP 8050 AP | Fagor CNC Keyboard Membrane Repair Kit | Available Now |
| Fagor CNC 8055 11" | Fagor Industrial Keypad Membrane Replacement | In Stock |
| FAGOR CNC 8055 AP | Switch Membrane FAGOR Replacement Repair | Available Now |
| Fagor CNC Controllers | Description | Inventory status |
Fagor HMI Manuals PDF Download:
FAQ:
Question: How to define the FAGOR CNC 8035-M-COL-2 Membrane Keypad Keyboard HMI profile program?
Answer: The profile program may be defined as follows.
• Key in the profile program number directly.
