UniOP eTOP11-0045 HMI Touch Screen Front Overlay
UniOP eTOP11-0045 HMI Touch Screen Front Overlay
UniOP eTOP11-0045 HMI Touch Screen Front Overlay
UniOP eTOP11-0045 HMI Touch Screen Front Overlay
UniOP eTOP11-0045 HMI Touch Screen Front Overlay
UniOP eTOP11-0045 HMI Touch Screen Front Overlay
Model
eTOP11-0045

Item specifics

Brand
UniOP
Warranty
365 Days
Product Line
UniOP series
Supply
eTOP11-0045 Protective Film Touch Screen Repair
Model
eTOP11-0045
Size
5.6 inch

Review

Description

UniOP eTOP series HMI eTOP11-0045 Touch Screen Panel Front Overlay Repair

Order each part separately is available

UniOP series HMI eTOP11-0045 Touchscreen Front Overlay Repair Kit

eTOP11-0045 Touch Film IHM Highlights
• 5.6” STN color display
• 1/4 VGA (320x240 pixel) resolution
• Resistive touchscreen
• Connection to industrial bus systems and Ethernet (requires optional plug-in modules)
• 32 MB user memory
• Compatible with local I/O


The eTOP11 eTOP11-0045 Front Overlay HMI is a low-cost HMI device with touchscreen interface and 5.6” STN graphic display. The compact size and the 1/4 VGA resolution make it an attractive solution where space is a premium without compromising performance.





Specifications:

The table below describes the parameters of the eTOP11-0045 UniOP Touchscreen Overlay.

Part Number: eTOP11-0045
Display Type: STN color LCD
Resolution: 320x240 pixels
Backlight: CCFL
Warranty: 365 Days
Input Power: 24VDC (+10%, -15%)
Operating Temperature: 0 to 45 °C
Display Size: 5.6 in
Touch screen: Resistive
Product Line: UniOP eTOP11 series


Related UniOP Series Part No. :

UniOP eTOP Description Inventory status
eTOP10-0050 UniOP eTOP Touch Screen Monitor Overlay Repair In Stock
eTOP10B-0045 Touch Screen Protective Film UniOP eTOP eTOP10B Available Now
eTOP10B-0050 UniOP eTOP10B Touch Screen Glass Front Overlay In Stock
eTOP10C-0045 UniOP eTOP eTOP10C Touch Protective Film In Stock
eTOP10C-0050 UniOP eTOP10C Touch Screen Overlay Replacement In Stock
eTOP11-0045 HMI Panel Glass Overlay eTOP eTOP11 Repair Available Now
eTOP11-0050 UniOP eTOP Front Overlay Touch Panel Glass In Stock
eTOP11-6550 UniOP eTOP Touch Screen Protective Film Repair Available Now
eTOP11E-0045 UniOP eTOP11E Touch Digitizer Protective Film In Stock
eTOP11E-0050 HMI Panel Glass Overlay eTOP eTOP11E Repair Available Now
eTOP11EB-0045 UniOP eTOP11EB HMI Panel Glass Front Overlay In Stock
eTOP11EB-0050 UniOP eTOP eTOP11EB Touch Protective Film In Stock
eTOP12-0045 HMI Panel Glass Overlay eTOP eTOP12 Repair Available Now
eTOP12-0050 Touch Screen Protective Film UniOP eTOP eTOP12 Available Now
Exor UniOP HMI Description Inventory status


Exor UniOP eTOP HMI Manuals PDF Download:

  • UniOP eTOP05 User Manuals
  • UniOP eTOP05, eTOP05P User Manuals
  • UniOP eTOP06 User Manuals
  • UniOP eTOP06C User Manuals
  • UniOP eTOP10, eTOP11, eTOP12 User Manuals
  • UniOP eTOP10B and eTOP11EB User Manuals
  • UniOP eTOP20B and eTOP21B User Manuals
  • UniOP eTOP30, eTOP32 User Manuals

  • FAQ:

    Question: How to cleaning eTOP11-0045 Touch Panel Glass Overlay IHM faceplates?

    Answer: The equipment must be cleaned only with a soft cloth and neutral soap product. Do not use solvents.


    Question: What is Exor UniOP eTOP11-0045 Touchscreen Calibration?

    Answer:

  • Standard calibration:
  • 1. Recall Configuration Mode
  • 2. Touch the CLEAR key on the eTOP11-0045 screen until a small round symbol will appear on the top right corner of the screen
  • 3. touch and hold the symbol until it will move to the low left corner of the eTOP11-0045 screen
  • 4. touch and hold the symbol until the indication to touch the ← key will be displayed on the screen
  • 5. touch and hold the key ← until the indication to touch the ↓ key will be displayed on the screen
  • 6. touch and hold the key ↓ until the indication to touch the Enter key will be displayed on the screen
  • 7. touch and hold the Enter key until the panel will switch to Operation Mode (if a valid project is loaded in the memory)
  • Emergency calibration.
  • The Emergency calibration procedure should be used in all cases when it would result not possible to go to calibration using the standard procedure.
  • 1. Switch of the unit
  • 2. turn on the unit
  • 3. tap in the middle of the touchscreen with a frequency of about one second until the operator panel will enter the Calibration Mode
  • 4. perform the standard calibration procedure.

  • Common misspellings: 

    eTOP11-005
    TOP11-0045
    eTOPll-0045
    eTOP11-0054
    eTOP110-0045