6FC5203-0AF04-1BA0 Siemens SIMATIC OP08T Membrane Keyboard

Description of Siemens 6FC5203-0AF04-1BA0 Terminal Keypad Housing
The extremely compact SINUMERIK OP 08T operator panel front enables a distributed configuration of the operator panel front and controller. The OP 08T 6FC5 203-0AF04-1BA0 operator panel front has a membrane keyboard with 79 keys(layout similar to SINUMERIK CNC editing keyboard KB 310C)as well as 2x8 horizontal and 2x8 vertical softkeys. The distance to the operator panel fronts is determined by the maximum distance of two network nodes access points. The operator panel front OP 08T 6FC52030AF041BA0 is connected to the PCU/NCU via the Ethernet as thin client in its own subnet (via DHCP server to PCU/NCU). The mixed operation with an operator panel front is possible directly at the PCU. The operator panel front of Siemens 6FC5203-0AF04-1BA0 Membrane Keypad Switch Plastic Shell is secured from the rear using special clamps supplied with the panel.

Compliance with the connection conditions of 6FC52030AF041BA0 HMI Case Membrane Keyboard Keypad
The controller is tested for compliance with the ambient conditions specified below. Trouble- free operation is only ensured if:
• These ambient conditions of 6FC5 203-0AF04-1BA0 are maintained when storing, transporting and operating the equipment.
• Original components and spare parts are used. This applies in particular to the use of specified cables and plug connectors.
• The equipment of 6FC5203-0AF04-1BA0 Shell Cover Membrane Keyboard Operator Panel Keypad is correctly installed and commissioned.

DANGER
The equipment may not be commissioned until it has been clearly identified that the machine in which the controller is installed, is in full conformance with the specifications in EC Directive 98/37/EC.

VICPAS supply 6FC5203-0AF04-1BA0 Operator Keyboard HMI Cover Siemens OP08T membrane switch with 6 months warranty and support Urgent Worldwide Shipping.