UTC-318DR-ATW0E UTC-318DR-ATB0E Front Overlay Touch Screen Panel Repair
UTC-318DR-ATW0E UTC-318DR-ATB0E Front Overlay Touch Screen Panel Repair
UTC-318DR-ATW0E UTC-318DR-ATB0E Front Overlay Touch Screen Panel Repair
UTC-318DR-ATW0E UTC-318DR-ATB0E Front Overlay Touch Screen Panel Repair
UTC-318DR-ATW0E UTC-318DR-ATB0E Front Overlay Touch Screen Panel Repair
UTC-318DR-ATW0E UTC-318DR-ATB0E Front Overlay Touch Screen Panel Repair
Model
UTC-318DR-ATW0E UTC-318DR-ATB0E

Item specifics

Warranty
365 Days
Shipping
2-4 workdays
Brand
Advantech
Product Line
UTC-318D Series
Supply Parts
Touchscreen Front Overlay
Size
18.5''
Touchscreen
5-Wire-Analog-Resisitive

Review

Description

Advantech UTC-318D Series UTC-318DR-ATW0E UTC-318DR-ATB0E Front Overlay Touch Screen Display Replacement

Order each part separately is available

Advantech UTC-318D Series UTC-318DR-ATW0E UTC-318DR-ATB0E Protective Film MMI Panel Screen Repair

Mounting Instruction


When mounting the HMI Advantech UTC-318D Series UTC-318DR-ATW0E UTC-318DR-ATB0E Touch Digitizer Glass Front Overlay, more than one person should perform the installation. Be careful and prevent accidental damage to the Advantech HMI UTC-318DR-ATW0E UTC-318DR-ATB0E Protective Film Touch Screen Panel or personal injury.


Wall Mounting


1. Select the location on the wall for the wall mount plate.
2. Mark the locations of the two plate screw holes on the wall.
3. Drill two pilot holes at the marked locations on the wall.
4. Align the wall mount plate screw holes with the pilot holes.
5. Secure the mount plate to the wall by inserting screws into the two pilot holes and tightening them. Be careful not to drop the Advantech screen UTC-318DR-ATW0E UTC-318DR-ATB0E Front Overlay Touch Membrane to the ground.
6. Insert four M4 screws into the holes on the panel PC and tighten them to secure the bracket to the rear panel. Check the stability of Advantech UTC-318DR-ATW0E UTC-318DR-ATB0E touch screen HMI Touch Glass Protective Film again.
7. To mount the panel PC on the wall, align the wall mount bracket attached to the panel PC with the wall mount plate on the wall and slide the panel PC downward to hang the bracket on the mount plate.
8. Secure the panel PC in place by tightening the screws into the wall mount bracket.




Specifications:

The table below describes the parameters of the Advantech UTC-318D Series UTC-318DR-ATW0E UTC-318DR-ATB0E HMI Touch Glass Front Overlay.

Durability (Touches): 36 Million
Storage Temperature : -20 ~ 60 °C (-4 ~ 140 °F)
Brand: Advantech
Light Transmission: 80%
Front Panel Protection: IP66
Environment: Free From Corrosive Gases
Product Line: UTC-318D Series
Display Size: 18.5''
Warranty: 1-Year Warranty
Operating Temperature: 0 ~ 40 °C (32 ~ 104 °F)


Related Advantech HMI No. :

Advantech HMI Description Inventory status
UTC-318HR-ATB0E Advantech Protective Film Touch Membrane Repair Available Now
UTC-318HR-ATW0E Advantech Touchscreen Front Overlay Replacement In Stock
UTC-318IR-ATB0E Advantech Front Overlay Touch Screen Film Repair Available Now
UTC-318IR-ATW0E Advantech Touch Screen Display Protective Film Replacement In Stock
UTC-320DR-ATB0E Advantech HMI Panel Screen Front Overlay Repair Available Now
UTC-320DR-ATW0E Advantech Protective Film Touch Screen Tablet Replacement In Stock
UTC-320FR-ATB0E Advantech Touch Screen Display Front Overlay Repair Available Now
UTC-320FR-ATW0E Advantech Protective Film Touch Screen Glass Replacement In Stock
UTC-320GR-ATB0E Advantech Front Overlay Touch Panel Repair Available Now
UTC-320GR-ATW0E Advantech Front Overlay Touch Digitizer Glass Repair Available Now
UTC-320HR-ATB0E Advantech Touch Panel Front Overlay Replacement In Stock
UTC-320HR-ATW0E Advantech Protective Film Touch Screen Display Repair Available Now
UTC-320IR-ATB0E Advantech Touchscreen Front Overlay Replacement In Stock
UTC-320IR-ATW0E Advantech Front Overlay Touch Screen Film Repair Available Now
Advantech HMI Description Inventory status

Advantech HMI Manuals PDF Download:

  • Advantech Industrial loT Systems and Devices Star Product Guide
  • UTC-318 User Manual_compressed

  • FAQ:

    Question: How do I calibrate the touch screen on Advantech UTC-318D series HMI?

    Answer: To calibrate the touch screen, go to the calibration settings in the HMI menu. Follow the on-screen instructions to touch specific calibration points accurately. This process ensures accurate touch input across the screen.


    Question: Which way can I finish the mounting without causing damage to Advantech UTC-318DR-ATW0E UTC-318DR-ATB0E Touch Digitizer Glass Front Overlay?

    Answer: Wall mounting, panel mounting, arm mounting and stand mounting will not do damage to Advantech UTC-318DR-ATW0E UTC-318DR-ATB0E Touch Panel Protective Film.

    Common misspellings: 

    TC-318DR-ATW0E

    UTC318DR-ATW0E

    UTC-318DR-TW0E

    UTC-318DDR-ATW0E

    UTC-318DR-ATW00E

    TC-318DR-ATB0E

    UTC-318DRATB0E

    UTC-3188DR-ATB0E

    UTC-318DR-ATB0EE

    UTC-318DR-AT0BE