UTC-315IR-ATW0E UTC-315IR-ATB0E Touch Screen Film Front Overlay

Caution During Transportation

While in transit, it is vital to protect Advantech screen UTC-315I Series UTC-315IR-ATW0E UTC-315IR-ATB0E Front Overlay Touch Panel from excessive mechanical stress to avoid potential damage. Without adequate packaging, Advantech HMI UTC-315IR-ATW0E UTC-315IR-ATB0E Touch Digitizer Glass Protective Film becomes vulnerable to shocks, vibrations, pressure, and moisture, all of which can compromise its integrity. The presence of damaged packaging indicates significant impacts from external conditions on the device. Therefore, it is highly recommended to use the original packaging for both transportation and storage purposes.

Furthermore, if HMI Advantech UTC-315IR-ATW0E UTC-315IR-ATB0E Touch Membrane Front Overlay is transported in cold weather or exposed to drastic temperature changes, it is crucial to prevent moisture, especially condensation, from accumulating on or inside the device. Moisture can cause short circuits and damage to the device's electrical components. To minimize this risk, store Advantech HMI UTC-315IR-ATW0E UTC-315IR-ATB0E Front Overlay Touch Screen Monitor in a dry environment. Also, before powering on the device, ensure it has acclimated to room temperature to prevent any potential issues. If condensation is observed, allow Advantech touch screen UTC-315IR-ATW0E UTC-315IR-ATB0E Protective Film HMI Panel Screen approximately 12 hours to dry completely before activating it to prevent potential damage.