91-28557-F00 MMI Touch Screen Panel Glass Replacement
- Model
- 91-28557-F00
Item specifics
- Warranty
- 365 Days
- Shipping
- 2-4 workdays
- Brand
- Vicpas
- Model Number
- 91-28557-F00
- Supply Parts
- Touch Screen Panel
- Size
- 15''
- Touchscreen
- 5-Wire-Analog-Resisitive
Review
Description
91-28557-F00 HMI Touch Screen Display Glass Panel Replacement
Mounting Instruction
When mounting 91-28557-F00 Touch Digitizer Glass, more than one person should perform the installation. Be careful and prevent accidental damage to 91-28557-F00 Touch Screen Panel or personal injury.
Wall Mounting
1. Select the location on the wall for the wall mount plate.
2. Mark the locations of the two plate screw holes on the wall.
3. Drill two pilot holes at the marked locations on the wall.
4. Align the wall mount plate screw holes with the pilot holes.
5. Secure the mount plate to the wall by inserting screws into the two pilot holes and tightening them. Be careful not to drop 91-28557-F00 Touch Membrane to the ground.
6. Insert four M4 screws into the holes and tighten them to secure the bracket to the rear panel. Check the stability of 91-28557-F00 HMI Touch Glass.
7. To mount the device on the wall, align the wall mount bracket attached to the device with the wall mount plate on the wall and slide the device downward to hang the bracket on the mount plate.
8. Secure the device in place by tightening the screws into the wall mount bracket.
Specifications:
The table below describes the parameters of 91-28557-F00 HMI Touch Glass.
| Relative Humidity: | 95%RH |
| Storage Temperature : | -40 ~ 60°C (-40 ~ 140°F) |
| Touch Type: | Resistive 5 Wires |
| Light Transmission: | Above 75% |
| Display Size: | 15'' |
| Operating Temperature: | 0 ~ 50°C (32 ~ 122°F) |
| Environment: | Free From Corrosive Gases |
| Brand: | Vicpas |
| Warranty: | 1-Year Warranty |
| Durability (Touches): | 36 million |
Advantech HMI Manuals PDF Download:
FAQ:
Question: Which way can I finish the mounting without causing damage to 91-28557-F00 Touch Digitizer Glass?
Answer: Wall mounting, panel mounting, arm mounting and stand mounting will not do damage to 91-28557-F00 Touch Panel.
Question: How can I protect 91-28557-F00 Touch Screen Panel?
Answer: Do not leave 91-28557-F00 MMI Panel Screen in an environment with a storage temperature of below -40° C or above 60° C as this may cause damage.
Common misspellings:
1-28557-F00
91-28557F00
91-228557-F00
91-28557-FF00
91-28557-0F0
