FPM1150GRVA1901-T FPM1150GRVA1902-T FPM1150GRVA1903-T FPM1150GRVA2001-T Overlay Panel

Order each part separately is available

Introduction of Touch Screen

The Advantech HMI FPM-1150G Series FPM1150GRVA1901-T FPM1150GRVA1902-T FPM1150GRVA1903-T FPM1150GRVA2001-T Front Overlay Touchscreen uses advanced 5-wire resistive technology. It provides more accurate sensing capacity than other technologies. The HMI Advantech FPM1150GRVA1901-T FPM1150GRVA1902-T FPM1150GRVA1903-T FPM1150GRVA2001-T Touch Digitizer Glass Protective Film is specially designed for tough industrial environments, and has been approved to FCC Class A standards.

Panel Mounting

The Advantech screen FPM-1150G Series FPM1150GRVA1901-T FPM1150GRVA1902-T FPM1150GRVA1903-T FPM1150GRVA2001-T HMI Panel Screen Front Overlay offers versatile mounting options, allowing it to be easily installed on various surfaces, including desks. Additionally, the Advantech touch screen Protective Film Touch Panel can be mounted using 75*75 VESA screw holes, compatible with standard arm or mount kits. It's important to note that the recommended screw size for VESA mounting is M4 x 6.
For panel installation of the Advantech FPM1150GRVA1901-T FPM1150GRVA1902-T FPM1150GRVA1903-T FPM1150GRVA2001-T Front Overlay Touch Membrane, release the mounting brackets by removing four screws from the rear side. Then, secure them at the top and bottom using screws. To complete the panel mounting, 10 clampers with M6 * 21mm screws are required, along with a cabinet cut-out measuring 381.4 x 302.5mm.