Advantech TPC-1251T-E3BU TPC-1251T-E3CE TPC-1251T-E3CU Touchpad Overlay Repair

Order each part separately is available

Description

The environmental conditions for Advantech HMI TPC-1251T-E3BU TPC-1251T-E3CE TPC-1251T-E3CU Touch Screen Panel Front Overlay are specified as follows: Humidity ranges from 10 to 95% relative humidity at 40°C/104°F, non-condensing. It boasts an Ingress Protection rating of IP66 for the HMI Advantech TPC-1251T-E3BU TPC-1251T-E3CE TPC-1251T-E3CU Protective Film Touch Membrane, ensuring resilience against dust and water. Operating temperature spans from -10 to 55°C/14 to 131°F without airflow, while storage temperature ranges from -20 to 70°C/-4 to 158°F. Additionally, vibration protection is provided, with an SSD enduring 1 Grms of vibration from 5 to 500 Hz during operation, ensuring reliability even under random vibrations.

Transport

During transportation, the Advantech screen Industrial Thin Client TPC-1251T Series TPC-1251T-E3BU TPC-1251T-E3CE TPC-1251T-E3CU HMI Touch Glass Front Overlay should be protected from excessive mechanical stress. If the product is transported or stored without packaging, shocks, vibrations, pressure, and moisture may impact the unprotected unit. Damaged packaging indicates that ambient conditions have already had a massive impact on the device. Therefore, we recommend using the original packaging for Advantech touch screen TPC-1251T-E3BU TPC-1251T-E3CE TPC-1251T-E3CU HMI Panel Glass Protective Film during transportation and storage.

If the device is transported in cold weather or exposed to extreme temperature variations, ensure that moisture (condensation) does not accumulate on or inside the device. Moisture can cause electrical circuits to short and damage the device. To avoid exposure to moisture, store the Advantech TPC-1251T-E3BU TPC-1251T-E3CE TPC-1251T-E3CU Front Overlay Touch Screen Glass in a dry place. Additionally, ensure the device is at room temperature before switching it on. If you notice condensation has occurred, wait for approximately 12 hours to allow the device to dry completely before switching it on.