TP-3052S1 HMI Touch Screen Tablet Replacement
TP-3052S1 HMI Touch Screen Tablet Replacement
TP-3052S1 HMI Touch Screen Tablet Replacement
TP-3052S1 HMI Touch Screen Tablet Replacement
Model
TP-3052S1

Item specifics

Warranty
365 Days
Shipping
2-4 workdays
Brand
Vicpas
Supply Parts
Touch Screen Display
Display Size
5.7 inches

Review

Description

TP-3052S1 Touch Screen Glass Replacement


TP-3052S1 Touch Digitizer Glass for repair replacement

Mounting

Place the TP-3052S1 Touch Screen Glass in a panet cut-out and fasten with the attached mounting clips at four places uniformly. Do not tighten excessively, otherwise it may be defommed or damaged. When installing the TP-3052S1 Touch Membrane vertically, make sure that the power input terminal is on the upper side. If the mounting clips are tightened obliquely to the panel, it may fall off the panel. Please attach this product to press down TP-3052S1 Touch Digitizer Glass in the portion of the mountain of gasket. Once removing especially in the attaching again, be careful. There is a possibility that it may become impossible to maintain waterproof ability.


Notes for Operation

The screen becomes blank when the backlight is burnt out; however, the TP-3052S1 Touchscreen remains enabled. Incorrect touch panel operation will occur when operating the touch panel when the backlight appears to be turned off but is actually burnt out. Please note that this erroneous operation may result in damage. At temperatures over the rated operating temperature, the clock accuracy is affected. Adjust the clock before use. For applications which require clock accuracy, adjust the clock periodically. When more than one button is pressed at the same time, due to the detection characteristics of TP-3052S1 Touch Panel, only the gravity center of the pressed area is sensed and the unit assumes that only one button is pressed. Thus, when more than one button is pressed simultaneously, the resulting operation is not guaranteed.





Specifications:

The table below describes the parameters of the TP-3052S1 Touch Membrane HMI.

Operating Humidity: 10 to 95% RH
Operating Temperature: 0 ~ 50°C
Display Type: TFT Color
Storage Temperature: -20 ~ 60°C
Brand: Vicpas
Model Number: TP-3052S1
Display Size: 5.7"
Warranty: 1-Year Warranty
Screen Type: Analog Resistive Film
Corrosion Immunity: Free from corrosive gases


IDEC HG2F Series Manuals PDF Download:

  • HG1F-2F-3F-4F Series
  • HG-Comparison Guide

  • FAQ:

    Question: Can I connect external devices to the TP-3052S1 Machine?

    Answer: Yes, the TP-3052S1 HMIs typically offer various communication ports, such as Ethernet, USB, RS232, or RS485. These ports allow you to connect external devices, such as PLCs, sensors, or other control equipment, for data exchange and system integration.


    Question: How do I calibrate the touch screen on the TP-3052S1 HMI?

    Answer: To calibrate the touch panel of TP-3052S1, go to the calibration settings in the HMI menu. Follow the on-screen instructions to touch specific calibration points accurately. This process ensures accurate touch input across the screen.

    Common misspellings: 

    P-3052S1

    TP-352S1

    TTP-3052S1

    T-P3052S1

    TP--3052S1