HG2S-TP X0005-0001 TP-3145S3 Touch Panel Replacement
HG2S-TP X0005-0001 TP-3145S3 Touch Panel Replacement
Model
HG2S-TP X0005-0001 TP-3145S3

Item specifics

Warranty
365 Days
Shipping
2-4 workdays
Brand
Vicpas
Supply Parts
Touch Screen Film

Review

Description

HG2S-TP X0005-0001 TP-3145S3 Touch Digitizer Glass Replacement


HG2S-TP X0005-0001 TP-3145S3 Touch Screen Film for repair replacement

Safety Precautions

1. Prevent the HG2S-TP X0005-0001 TP-3145S3 Touchscreen from falling while moving or transporting, otherwise damage or malfunction of the Touch will result.
2. Improper installation will result in falling, failure, electrical shock, fire hazard, or malfunction of the Touch.
3. Any twists in the gasket and the Mounting Gasket will impair the waterproof characteristics.
4. The HG2S-TP X0005-0001 TP-3145S3 Touch Panel is made of glass and will break if exposed to excessive shock. Take due care when handling it.
5. Do not push hard or scratch the touch panel and protection sheet with a hard object such as a tool, because they are damaged easily.
6. Do not tighten the mounting clips obliquely to the panel or excessively, otherwise the HG2S-TP X0005-0001 TP-3145S3 HMI Panel Glass may warp and cause wrinkle on the display, or the waterproof characteristics may be impaired.
7. The HG2S-TP X0005-0001 TP-3145S3 Touch Digitizer Glass uses an LCD(liquid crystal display) as a display device. The liquid inside the LCD is harmful to the skin. If the LCD is broken and the liquid attaches to your skin or clothes, wash the liquid off using soap, and consult a doctor immediately.
8. Turn off the power to the Touch before installation, removal, wiring, maintenance, and inspection of the Touch. Failure to turn power off may cause electrical shock or fire hazard.
9. Emergency and interlocking circuits must be configured outside of the HG2S-TP X0005-0001 TP-3145S3 Touch Membrane. Do not use the Touch's internal touch switches for an emergency circuit. If the Touch failed, the external equipment connected to the Touch will no longer be protected and serious injury to operators and equipment damage may be caused.
10. Special expertise is required to install, wire, configure, and operate the HG2S-TP X0005-0001 TP-3145S3 Touch Panel. People without such expertise must not use the Touch.





Specifications:

The table below describes the parameters of the HG2S-TP X0005-0001 TP-3145S3 Touch Digitizer Glass HMI.

Warranty: 1-Year Warranty
Storage Humidity: 20 to 85% RH
Corrosion Immunity: Free from corrosive gases
Storage Temperature: -20 ~ 60°C
Brand: Vicpas
Operating Temperature: 0 ~ 40°C
Operating Humidity: 10 to 90% RH
Mounting: Panel Mounting
Screen Type: Analog Resistive Film
Degree of Protection: IP65


IDEC HG2S Series Manuals PDF Download:

  • IDEC-HMI-Selection-Guide
  • IDEC-Data-File-Manager-Users-Manual

  • FAQ:

    Question: Can I connect external devices to the HG2S-TP X0005-0001 TP-3145S3 HMI?

    Answer: Yes, the HG2S-TP X0005-0001 TP-3145S3 HMIs typically offer various communication ports, such as Ethernet, USB, RS232, or RS485. These ports allow you to connect external devices, such as PLCs, sensors, or other control equipment, for data exchange and system integration.


    Question: How can I create and modify screens on the HG2S-TP X0005-0001 TP-3145S3 HMI?

    Answer: HG2S-TP X0005-0001 TP-3145S3 HMI usually comes with dedicated software for screen development. Install the software on your computer, and then use it to design and customize screens with elements like buttons, images, text, and data display. The software often offers intuitive drag-and-drop interfaces for easy screen creation and modification.

    Common misspellings: 

    G2S-TP X0005-0001 TP-3145S3

    HG2STP X0005-0001 TP-3145S3

    HG2S-TP X005-0001 TP-3145S3

    HG2S-TP X0005-000 TP-3145S3

    HHG2S-TP X0005-0001 TP-3145S3