HG3F-TP X0030-0001 Touch Screen Display Replacement
HG3F-TP X0030-0001 Touch Screen Display Replacement
HG3F-TP X0030-0001 Touch Screen Display Replacement
HG3F-TP X0030-0001 Touch Screen Display Replacement
Model
HG3F-TP X0030-0001

Item specifics

Warranty
365 Days
Shipping
2-4 workdays
Brand
Vicpas
Supply Parts
Touch Screen Panel
Display Size
10.4 inches

Review

Description

HG3F-TP X0030-0001 MMI Touch Screen Glass Replacement


HG3F-TP X0030-0001 Touch Digitizer Glass for repair replacement

Safety Precautions

1. Prevent the HG3F-TP X0030-0001 Touchscreen from falling while moving or transporting, otherwise damage or malfunction of the Touch will result.
2. Improper installation will result in falling, failure, electrical shock, fire hazard, or malfunction of the Touch.
3. Any twists in the gasket and the Mounting Gasket will impair the waterproof characteristics.
4. The HG3F-TP X0030-0001 Touch Panel is made of glass and will break if exposed to excessive shock. Take due care when handling it.
5. Do not push hard or scratch the touch panel and protection sheet with a hard object such as a tool, because they are damaged easily.
6. Do not tighten the mounting clips obliquely to the panel or excessively, otherwise the HG3F-TP X0030-0001 HMI Panel Glass may warp and cause wrinkle on the display, or the waterproof characteristics may be impaired.
7. The HG3F-TP X0030-0001 Touch Digitizer Glass uses an LCD(liquid crystal display) as a display device. The liquid inside the LCD is harmful to the skin. If the LCD is broken and the liquid attaches to your skin or clothes, wash the liquid off using soap, and consult a doctor immediately.
8. Turn off the power to the Touch before installation, removal, wiring, maintenance, and inspection of the Touch. Failure to turn power off may cause electrical shock or fire hazard.
9. Emergency and interlocking circuits must be configured outside of the HG3F-TP X0030-0001 Touch Membrane. Do not use the Touch's internal touch switches for an emergency circuit. If the Touch failed, the external equipment connected to the Touch will no longer be protected and serious injury to operators and equipment damage may be caused.
10. Special expertise is required to install, wire, configure, and operate the HG3F-TP X0030-0001 Touch Panel. People without such expertise must not use the Touch.





Specifications:

The table below describes the parameters of the HG3F-TP X0030-0001 Touch Digitizer Glass HMI.

Warranty: 1-Year Warranty
Storage Humidity: 20 to 85% RH
Corrosion Immunity: Free from corrosive gases
Storage Temperature: -20 ~ 60°C
Brand: Vicpas
Operating Temperature: 0 ~ 50°C
Model Number: HG3F-TP X0030-0001
Display Size: 10.4"
Screen Type: Analog Resistive Film
Degree of Protection: IP66

IDEC HG3F Series Manuals PDF Download:

  • IDEC-HMI-Selection-Guide
  • IDEC-Data-File-Manager-Users-Manual

  • FAQ:

    Question: Can I connect external devices to the HG3F-TP X0030-0001 HMI?

    Answer: Yes, the HG3F-TP X0030-0001 HMIs typically offer various communication ports, such as Ethernet, USB, RS232, or RS485. These ports allow you to connect external devices, such as PLCs, sensors, or other control equipment, for data exchange and system integration.


    Question: How can I create and modify screens on the HG3F-TP X0030-0001 HMI?

    Answer: HG3F-TP X0030-0001 HMI usually comes with dedicated software for screen development. Install the software on your computer, and then use it to design and customize screens with elements like buttons, images, text, and data display. The software often offers intuitive drag-and-drop interfaces for easy screen creation and modification.

    Common misspellings: 

    H3F-TP X0030-0001

    HG3FTP X0030-0001

    HHG3F-TP X0030-0001

    HG3F-TP X00300-001

    HG3F-TPX0030-0001