IDEC HG1F-SB22YF-W Protective Film Touch Display Repair

Order each part separately is available

Operating environment

For designed performance and safety of the touchscreen, do not install the HG1F-SB22YF-W Front Overlay Touch Panel in the following environments:

1. Where dust, briny air, or iron particles exist.
2. Where oil or chemical splashes for a long time.
3. Where oil mist is filled.
4. In direct sunlight.
5. Where strong ultraviolet rays exist.
6. Where corrosive or combustible gasses exist.
7. Where the HG1F-SB22YF-W Touch Screen Overlay Film is subjected to shocks or vibrations.
8. Where condensation occurs due to rapid temperature change.
9. Where high-voltage or arc-generating equipment (electromagnetic contactors or circuit protectors)exists in the vicinity.

Ambient temperature for HG1F-SB22YF-W Protective Film HMI Touch Glass

1. Allow sufficient space for ventilation, and install the equipment away from heat sources.
2. Allow at least 100mm between the Touch and walls or other equipment.
3. Do not install the HG1F-SB22YF-W Touch Digitizer Front Overlay where the ambient temperature exceeds the rated operating ambient temperature range. When mounting the Touch in such locations, provide a forced air-cooling fan or air-conditioner to keep the ambient temperature within the rated temperature range.
4. The HG1F-SB22YF-W Overlay Film Touch Screen Tablet is designed to install on a vertical plane so that natural air-cooling is provided.
5. If you install it using any other orientation, use forced-air cooling, or lower the ambient operating temperature.