Panasonic FP-VN-1 FP-VM-4-MO FP-VM-6-MO FP-VM-10-MO Glass

VICPAS supply Panasonic FP-VN-1 FP-VM-4-MO FP-VM-6-MO FP-VM-10-MO Touch Panel with 365 days warranty and support Urgent Worldwide Shipping. Before You Start Panasonic FP-VN-1 FP-VM-4-MO FP-VM-6-MO FP-VM-10-MO
■ Usage conditions
 Ambient temperatures: 0 to 50 °C
 Ambient humidity should be 5 to 85% RH (at +25 °C and non-condensing.)
 Usable altitude: 2000 m above sea level or lower
 For use in pollution degree 2 environment
 Do not use it in the following environments.
- Direct sunlight, wind and rain. (This product is not designed for outdoor use.)
- Inflammable or corrosive gas.
- Excessive airborne dust, metal particles or saline matter.
- Benzine, paint thinner, alcohol or other organic solvents or strong alkaline solutions such as ammonia or caustic soda.
- Direct vibration, shock or places always exposed to drop of water.
- This unit is warranted by IP66, IP20 for panel mounting, however, this applies to initial values and evaluated by us.
- Influence from power transmission lines, high voltage equipment, power cables, power equipment, radio transmitters, or any other equipment that would generate high switching surges. (100 mm or more)
 The vents in the FP-VN-1 FP-VM-4-MO FP-VM-6-MO FP-VM-10-MO panel casing must not be obstructed.

■ Touch switches
 Always operate the FP-VN-1 FP-VM-4-MO FP-VM-6-MO FP-VM-10-MO touch switches with fingers. As the touch switches may be damaged due to the excessive load or shock (caused when being operated with any tools), the touch switches should be operated within the specified control force. Also, if the FP-VN-1 FP-VM-4-MO FP-VM-6-MO FP-VM-10-MO touch switches are pressed like kneading, the electrode may be worn out exceptionally, and cause the malfunction. Operate with a single touch of a switch.
 The FP-VN-1 FP-VM-4-MO FP-VM-6-MO FP-VM-10-MO touch position may shift due to aging variation. If the touch position has shifted, please adjust it.