DMC AST-121A080A Touch Screen Panel Glass Original
- Model
- AST-121A080A
Item specifics
- Touch screen panel type
- Resistance touch screen
- Size
- 12.1 inch
- Warranty
- 365 Days
- Shipping
- 2-3 working Days
- Modle
- AST-121A / AST-121A080A
- Tail Length & Position
- 80mm (Left Side)
- External Dimension(E)
- 263.0 x 201.0mm
- Glass Thickness(Total)
- 1.8mm (2.1mm)
Review
- B***y
- 2019/12/6 18:21
Excellent communication with quick replies and quotes, have found that our account manager Jack has good product knowledge and can often offer alternative options if the required part is on a long delivery, have placed several orders and only had positive feedback from our branches and customer on the service given from VICPAS
Description
DMC AST-121A AST-121A080A Touch Screen Panel Glass Original Repair Replacement
The AST-121A080A work Maximum Voltage DC6V with 100mA Top Electrode, Bottom Electrode 100mA, Between the Top and Bottom. Tail Length & Position 80mm (Left Side), External Dimension 263.0 x 201.0mm, Glass Thickness(Total) 1.8mm (2.1mm).The touch screen type is analog resistive 4-wire. Highly durable and versatile. Operation is guaranteed up to as many as 10 million strokes (4-wire type)/ 35 million strokes (5-wire type).
DMC AST121A080A touchscreen panel work Operating Temperature: -20 °C to 70 °C (no condensation), Operating Humidity -20°C to 60°C Less than 90%RH (no condensation) Exceeding 60°C 133.8g/m3 (no condensation).
VICPAS supply DMC AST-121A080A 12.1 inches Touch Screen Panel Glass Original for repair replacement. All of them with VICPAS 365 days warranty and support Urgent Worldwide Shipping.
Specifications:
The table below describes the parameters of the DMC AST-121A080A Touch screen Panel Glass.
| Part Number : | AST-121A080A |
| Manufacturer: | DMC |
| Screen diagonal | 12.1 in |
| Warranty: | 365 Days Warranty |
| Interfaces | USB / RS232 |
| Touchpoints: | 1 |
| Glass Strength: | 1.8 mm |
| Technology: | Analog resistive 4-wire |
| Active Area: | 250.0 x 188.5mm |
| Viewing Area Dimension | 247.0 x 185.5mm |
DMC AST / ATP Series Manuals PDF Download:
DMC AST / ATP Touch Screen Handling Notes
Precautions
This product is intended for use in standard applications (computers, office automation, and other office equipment, industrial, communications, and measurement equipment, personal and household devices, etc.)
Please avoid using this product for special applications where failure or abnormal operation may directly affect human lives, or cause physical injury or property damage, or where extremely high levels of reliability are required (such as aerospace systems, vehicle operating control, atomic energy controls, medical devices for life support, etc.).
Handling Notes
- Do not depress or scratch the product with any object with a sharp edge or hard end.
- Do not put this product close to fire.
- Do not wipe this product with too much load.
- Do not strongly rub this product locally. It may affect the product’s functions.
- Do not hit the product with a hard object.
- Do not forcibly bend or fold the product.
- When the product is stored, make sure it is packed in a packing box and stored in a storage temperature range, eliminating any outside load.
- Do not use or store the product under a condition where the product will be exposed to water, organic solution or acid.
- Do not use the product under the direct sunlight.
- Do not disassemble the product.
- When you handle the product, Hold the product by its body. Do not hold by the tail.
- Clean the product with a soft cloth or a soft cloth with neutral detergent or alcohol. When contaminated by chemicals, wipe them off immediately with caution not to cause injury to human body.
- The edge of the glass is not rounded and may cause injury.
Construction Notes
The environmental specifications, mechanical characteristics, and electrical characteristics are only applied to the Active Area.
Do not use the touchscreen when the condensation occurs. The condensation inside of the touchscreen is a natural phenomenon and should disappear after the touchscreen is warmed up.
Common misspellings:
ST-121A080A
AT-121A080A
AS-121A080A
AST-121A08A
AST-121A080
